# Start of navigation data from: icnavsquadrons.xml
<1><Domovská stránka aplikace Information center><icmain.htm>
<2><Jak používat aplikaci Information Center><icfaq.htm>
<2><Přehled kolekcí témat><icoverview.htm>
<2><Mapa publikací k serveru pSeries v rámci aplikace Information Center><icpserieslist.htm>
<2><Tisknutelné dokumenty a publikace ve formátu PDF><icpdflist.htm>
<2><Co je nového v aplikaci Information Center><icupdates.htm>
<2><Mapa serveru><icsitemap.htm>
<1><Plánování><iphadkickoff.htm>
# Start of navigation data from: iphaf/iphaftoc.xml
<1><Initial server setup><iphaf/iphafisskickoff.htm>
<2><What's new><iphaf/whatsnew.htm>
<2><Printable PDFs><iphaf/iphafprintpdfs.htm>
<2><Creating a customized setup checklist><iphaf/issintwelcome.htm>
<2><Using predefined setup checklists><iphaf/iphafpredefined.htm>
<2><Related information><iphaf/iphafrelatedinfo.htm>
# End of navigation data from: iphaf/iphaftoc.xml
# Start of navigation data from: iphbj/iphbjtoc.xml
<1><Migrace nebo přechod serveru na vyšší verzi><iphbj/kickoff.htm>
<2><Servery iSeries><iphbj/iserieskickoff.htm>
# Start of navigation data from: iphbg/iphbgtoc.xml
<3><Přechody na vyšší verzi><iphbg/iphbgkickoff.htm>
<4><Co je nového><iphbg/whatnew.htm>
<4><Tisknutelná PDF><iphbg/hdrprint.htm>
<4><Koncepce přechodů na vyšší verzi><iphbg/hdrconcepts.htm>
<5><Terminologie související s přechody na vyšší verzi><iphbg/rzamdupgradeterms.htm>
<5><Cesty přechodu na vyšší verzi><iphbg/hdrpaths.htm>
<5><Časové schéma přechodu na vyšší verzi><iphbg/hdrconcept.htm>
<4><Kontrolní seznam při přechodu na vyšší verzi><iphbg/checklist.htm>
<4><Přizpůsobení kontrolního seznamu přechodu na vyšší verzi><iphbg/iphbgintwelcome.htm>
<4><Přechod serveru na vyšší verzi><iphbg/hdrupgradesteps.htm>
<5><Úkoly při přechodu na vyšší verzi><iphbg/planningtasks.htm>
<5><Úkoly ve fázi objednání><iphbg/ordertasks.htm>
<6><Konfigurace objednávky><iphbg/configorder.htm>
<6><Ověření objednávky><iphbg/validateorder.htm>
<6><Ověření plánu projektu přechodu na vyšší verzi><iphbg/validateprojectp.htm>
<6><Zadání objednávky><iphbg/placeorder.htm>
<5><Úkoly ve fázi přípravy><iphbg/preparationtasks.htm>
<6><Potvrzení harmonogramu přechodu na vyšší verzi><iphbg/confirmschedule.htm>
<6><Příprava prostředí><iphbg/prepareenvironment.htm>
<7><Přidání, náhrada nebo odstranění hardwarové komponenty><iphbg/addreplacehdwfeature.htm>
<8><Příprava na přechod komponenty na vyšší verzi><iphbg/hdrprocinst.htm>
<8><Provedení přechodu komponenty na vyšší verzi><iphbg/hdrfeatureupgradedonelpar.htm>
<8><Provádění správy prostředků><iphbg/hdrresourcemgmtlpar.htm>
<7><Aktivace neaktivních prostředků><iphbg/hdrswupgrade.htm>
<7><Konverze rozšíření základních jednotky v případě serveru rozděleného na logické části><iphbg/rzamdexpanupgradelpar.htm>
<8><Cesty konverze rozšíření základní jednotky a související problémy><iphbg/exunitpathscon.htm>
<8><Příprava konverze rozšíření základní jednotky><iphbg/rzamdprepexpanupgradelpar.htm>
<9><Přeřazení adresování SPCN><iphbg/rzamdexpanupgradelparspcn.htm>
<9><Tisk a příprava konfigurace pro konverzi rozšíření základní jednotky><iphbg/rzamdexpanupgradelpardoc.htm>
<7><Vyčištění diskové paměti><iphbg/cleandisks.htm>
<7><Vyčištění hardwaru serveru><iphbg/cleansystem.htm>
<7><Přizpůsobení paměti a prostředků zpracování><iphbg/adjustmemproc.htm>
<7><Změna konfiguračních objektů><iphbg/changeobject.htm>
<7><Shromáždění dat o výkonu><iphbg/gatherperfdata.htm>
<7><Příprava konzole><iphbg/prepareconsole.htm>
<7><Zálohování dat><iphbg/backupdata.htm>
<6><Vytvoření plánu testování><iphbg/developtestplan.htm>
<6><Naplánování procesu kontroly akceptace><iphbg/schedulereview.htm>
<5><Úkoly ve fázi před instalací><iphbg/preinstallationtasks.htm>
<6><Tisk informací o serveru><iphbg/printsystem.htm>
<6><Zkopírování konfigurace LPAR na disketu><iphbg/copylparconfig.htm>
<6><Zaznamenání uživatelských ID a hesel><iphbg/recorduserid.htm>
<6><Příprava pracoviště na přechod na vyšší verzi><iphbg/preparelocation.htm>
<6><Přezkoumání plánu projektu a rezervního plánu><iphbg/reviewplans.htm>
<5><Úkoly ve fázi instalace><iphbg/installationtasks.htm>
<6><Kontrola, zda jste provedli všechny nezbytné přípravné úkoly><iphbg/completetasks.htm>
<6><Instalace softwaru><iphbg/installsw.htm>
<7><Přechod systému i5/OS a souvisejícího softwaru na vyšší verzi><iphbg/uptov5r3.htm>
<7><Přechod na vyšší verzi operačního systému Linux a jeho příprava na přechod serveru na vyšší verzi><iphbg/preplinux.htm>
<8><Příprava systému Red Hat na přechod serveru na vyšší verzi><iphbg/prepredhat.htm>
<8><Příprava systému SUSE LINUX Enterprise Server na přechod serveru na vyšší verzi><iphbg/prepsuse.htm>
<7><Aktualizace, migrace a příprava operačního systému AIX na přechod serveru na vyšší verzi><iphbg/softaix.htm>
<7><Instalace PTF><iphbg/installfixes.htm>
<7><Zálohování serveru><iphbg/systembackup.htm>
<6><Instalace hardwaru><iphbg/installhardware.htm>
<7><Dokončení konečné přípravy serveru na přechod na vyšší verzi><iphbg/finalpreptasks.htm>
<7><Poskytnutí kontrolních seznamů a informací o serveru><iphbg/validatereadiness.htm>
<7><Vypnutí serveru><iphbg/shutdownhandoff.htm>
<7><Provedení instalace hardwaru (autorizovaný servisní technik)><iphbg/servicereptasks.htm>
<7><Získání cílového serveru><iphbg/machineacceptance.htm>
<5><Úkoly ve fázi po instalaci><iphbg/postinstallationtasks.htm>
<6><Dokončení konfigurace serveru><iphbg/finalizeconfig.htm>
<6><Uložení logických částí serveru a celého firmwaru><iphbg/savesystem.htm>
<6><Testování serveru><iphbg/testsystem.htm>
<4><Scénáře: Přechody na vyšší verzi><iphbg/scenarios.htm>
<4><Odstraňování problémů><iphbg/troubles.htm>
<4><Související informace><iphbg/hdrrelatedinfo.htm>
# End of navigation data from: iphbg/iphbgtoc.xml
# Start of navigation data from: iphbh/iphbhtoc.xml
<3><Migrace dat><iphbh/hdrkickoff.htm>
<4><Co je nového><iphbh/hdrwhatnew.htm>
<4><Prohlížení a tisk PDF><iphbh/hdrprint.htm>
<4><Koncepce přechodu na vyšší verzi><iphbh/concepts.htm>
<4><Plánování migrace dat><iphbh/hdrplanmigration.htm>
<5><Pokyny týkající se hardwaru při plánování migrace dat><iphbh/planhardw.htm>
<5><Pokyny týkající se softwaru při plánování migrace dat><iphbh/plansoftw.htm>
<5><Pokyny týkající se konzole při plánování migrace dat><iphbh/planconn.htm>
<5><Zaznamenání plánu migrace dat><iphbh/finishplan.htm>
<4><Příprava na migraci dat><iphbh/hdrmigrationprep.htm>
<5><Příprava na migraci dat s operačním systémem OS/400 V5R3 na zdrojovém serveru><iphbh/migratev5r3.htm>
<5><Příprava na migraci dat z V5R1 nebo V5R2><iphbh/hdmigrationprep45xx.htm>
<5><Příprava na migraci dat z logické části s operačním systémem Linux><iphbh/preplinux.htm>
<6><Příprava na migraci dat z Red Hat Enterprise Linux><iphbh/prepmigredhat.htm>
<6><Příprava na migraci dat ze SUSE LINUX Enterprise Server><iphbh/prepsuselinux.htm>
<4><Provedení migrace dat><iphbh/performing.htm>
<5><Dokončení migrace dat s operačním systémem OS/400 V5R3 na zdrojovém serveru><iphbh/hdrmigrationproc.htm>
<5><Dokončení migrace dat z V5R1 nebo V5R2><iphbh/hdrmigrationproc45xx.htm>
<5><Dokončení migrace dat z logické části s operačním systémem Linux><iphbh/completelinux.htm>
<6><Dokončení migrace dat z Red Hat Enterprise Linux><iphbh/completeredhat.htm>
<6><Dokončení migrace dat ze SUSE LINUX Enterprise Server 9><iphbh/completesuselinux.htm>
<4><Scénáře: Migrace dat><iphbh/scenarios.htm>
<4><Odstraňování problémů><iphbh/troubles.htm>
<4><Související informace><iphbh/relinfo.htm>
# End of navigation data from: iphbh/iphbhtoc.xml
<2><Servery pSeries><iphbj/pserieskickoff.htm>
# Start of navigation data from: iphbm/iphbmtoc.xml
<3><Upgrades><iphbm/iphbmkickoff.htm>
<4><Printable PDFs><iphbm/iphbmprintthis.htm>
<4><Concepts><iphbm/iphbmconcepts.htm>
<5><Upgrade paths><iphbm/iphbmpaths.htm>
<5><Upgrade considerations><iphbm/iphbm_upgrade_considerations.htm>
<5><Upgrade terminology for pSeries><iphbm/iphbmupgradeterms.htm>
<4><Upgrade checklist><iphbm/iphbmupgradechecklist.htm>
<4><Upgrading the server><iphbm/iphbmupgradesteps.htm>
<5><Upgrade planning tasks><iphbm/iphbm_plan_checklist.htm>
<5><Order tasks><iphbm/iphbmorder.htm>
<6><Configuring your order><iphbm/iphbm_configorder.htm>
<6><Validating your order><iphbm/iphbm_validateorder.htm>
<6><Validating your upgrade project plan><iphbm/iphbm_validateprojectp.htm>
<6><Placing your order><iphbm/iphbm_placeorder.htm>
<5><Preparation tasks><iphbm/iphbmplanupgrade.htm>
<6><Confirming your upgrade schedule><iphbm/iphbmschedule.htm>
<6><Cleaning up disk storage><iphbm/iphbmcleanupdisk.htm>
<6><Adjusting memory and processing resources><iphbm/iphbmadjustmem.htm>
<6><Developing your test plan><iphbm/iphbmdeveloptest.htm>
<6><Scheduling your acceptance review><iphbm/iphbmacceptreview.htm>
<5><Preinstallation tasks><iphbm/iphbmprepare.htm>
<6><Software considerations><iphbm/iphbm_sw_considerations.htm>
<6><System backup requirements><iphbm/iphbm_sys_backup.htm>
<6><Preparing your location for the upgrade><iphbm/iphbmlocation.htm>
<6><Reviewing your project and contingency plans><iphbm/iphbmcontingency.htm>
<6><Running the AIX pre_migration command><iphbm/iphbm_run_premigration.htm>
<5><Performing your upgrade><iphbm/iphbmupgradetasks.htm>
<6><Updating AIX with a new maintenance level><iphbm/iphbm_updateall_howto.htm>
<6><Migrating AIX to a new version or release><iphbm/iphbm_migration_howto.htm>
<6><Backing up AIX to CD><iphbm/iphbmbackup.htm>
<6><Configuring the HMC management environment><ipha1/configuringyourhmcmanagementenvironment.htm>
<6><Saving your existing partition profiles from a Hardware Management Console><iphbm/iphbm_migrate_part.htm>
<6><Restore an AIX system backup from CD><iphbm/iphbm_update_profiles.htm>
<5><Testing your server><iphbm/iphbmtesting.htm>
<4><Scenarios: pSeries upgrades><iphbm/iphbmupgradescenarios.htm>
<4><Troubleshooting><iphbm/iphbmupgradetroubleshoot.htm>
<4><Related information><iphbm/iphbmupgraderelatedinfo.htm>
# End of navigation data from: iphbm/iphbmtoc.xml
# End of navigation data from: iphbj/iphbjtoc.xml
# Start of navigation data from: iphb2/iphb2toc.xml
<1><Using a virtual computing environment><iphb2/kickoff.htm>
<2><What's new><iphb2/whatnew.htm>
<2><Printable PDFs><iphb2/printablepdfs.htm>
<2><Virtualization overview><iphb2/whatisvirtualization.htm>
<3><IBM Virtualization Engine><iphb2/virtualizationengine.htm>
<4><Virtualization Engine systems services><iphb2/virtsystemsservices.htm>
<3><Virtualization technologies><iphb2/virtsystemstechnologies.htm>
<4><POWER Hypervisor><iphb2/virthypervisor.htm>
<4><Micro-Partitioning><iphb2/virtmicropart.htm>
<4><Virtual networking, adapters, and storage><iphb2/virtnetworking.htm>
<5><Virtual I/O Server><iphb2/virtio.htm>
<5><Virtual resource support for i5/OS><iphb2/virti5os.htm>
<4><Capacity on demand><iphb2/virtcod.htm>
<4><Multiple operating system support><iphb2/virtmultossup.htm>
<4><Logical partition resource management><iphb2/dynamicallyaddingresources.htm>
<4><Advanced POWER Virtualization technologies><iphb2/apv.htm>
<4><Advanced OpenPower Virtualization technologies><iphb2/aopv.htm>
<2><Planning for a virtual computing environment><iphb2/planningforyourvirtualizedenvironment.htm>
<2><Related information><iphb2/related.htm>
# End of navigation data from: iphb2/iphb2toc.xml
# Start of navigation data from: iphag/iphagtoc.xml
<1><Installing hardware><iphag/installhardware.htm>
# Start of navigation data from: iphah/iphahtoc.xml
<2><Kabelové připojení serveru><iphah/cablekickoff.htm>
<3><Prohlížení a tisk PDF><iphah/printiphah.htm>
<3><Výběr podle modelu><iphah/selectbymodel.htm>
<3><Sériový konverzní kabel pro zdroj nepřerušitelného napájení (UPS)><iphah/upscable.htm>
<3><Reference><iphah/references.htm>
# End of navigation data from: iphah/iphahtoc.xml
# Start of navigation data from: iphai/iphaitoc.xml
<2><Adding a console><iphai/addconsole.htm>
<3><Hardware Management Console><iphai/hmc.htm>
<4><Printable PDF><iphai/printhmcpdf.htm>
<4><HMC overview><iphai/concepts.htm>
<5><Implementations of Hardware Management Consoles><iphai/hmctypes.htm>
<5><Predefined passwords><iphai/whychgprepwds.htm>
<5><Installation requirements for the remote client><iphai/remoteinstallreqs.htm>
<5><Remote client comparison><iphai/staticvswebstart.htm>
<5><System Manager Security><iphai/clientserver.htm>
<4><Setting up the HMC><iphai/installhmc.htm>
<5><Cabling the HMC><iphai/cable.htm>
<5><Gathering required configuration settings><iphai/prep.htm>
<5><Configuring the HMC><iphai/configure.htm>
<6><Using the Guided Setup wizard><iphai/confighmcgs.htm>
<6><Using the HMC configuration checklist><iphai/configchklst.htm>
<4><Installing and securing the remote client><iphai/remotehmc.htm>
<4><Changing the console that manages i5/OS><iphai/chgos400con.htm>
<5><HMC to Operations Console><iphai/hmctoops.htm>
<5><HMC to twinaxial console><iphai/hmctotwinax.htm>
<5><Operations Console to HMC><iphai/opstohmc.htm>
<5><Twinaxial console to HMC><iphai/twinaxtohmc.htm>
<4><Troubleshooting><iphai/troubleshoot.htm>
<4><Related information><iphai/relatedinfo.htm>
# Start of navigation data from: iphby/iphbytoc.xml
<3><Advanced System Management Interface><iphby/asmi.htm>
<4><Printable PDF><iphby/printasmipdf.htm>
<4><Accessing the ASMI using a Web browser><iphby/browser.htm>
<4><Accessing the ASMI using an ASCII console><iphby/ascii.htm>
<4><Accessing the ASMI using the HMC><iphby/asmihmc.htm>
<4><Troubleshooting><iphby/troubleshootasmi.htm>
# End of navigation data from: iphby/iphbytoc.xml
# Start of navigation data from: iphbx/iphbxtoc.xml
<3><Operations Console><iphbx/opsconsole.htm>
<4><What's new><iphbx/whatnew.htm>
<4><Printable PDF><iphbx/print.htm>
<4><Types of Operations Consoles><iphbx/opsconnaming.htm>
<4><Planning for Operations Console><iphbx/planning.htm>
<5><Planning for your configuration><iphbx/planconfig.htm>
<6><Considerations><iphbx/consoleplanningconsiderations.htm>
<6><Planning for a backup console><iphbx/backupconsole.htm>
<6><Scenarios: Selecting your configuration><iphbx/scenarios.htm>
<7><Single console (directly attached)><iphbx/scenarioone.htm>
<7><Single console (directly attached with remote support)><iphbx/scenariotwo.htm>
<7><Consoles for multiple servers><iphbx/scenariothree.htm>
<6><Preparing for your network environment><iphbx/minnetwork.htm>
<6><Securing your console configuration><iphbx/security.htm>
<6><Preparing for your console and iSeries Navigator configuration><iphbx/opsnav.htm>
<6><Verifying console requirements><iphbx/verifyrequirements.htm>
<7><Hardware requirements><iphbx/hardwarereq.htm>
<7><Software requirements><iphbx/softwarereq.htm>
<7><Available communications ports><iphbx/verifycommport.htm>
<5><Planning for an installation or upgrade><iphbx/planupgrade.htm>
<5><Virtual and remote control panel><iphbx/controlpanel.htm>
<6><Planning for the VCP and RCP><iphbx/planvirtualcp.htm>
<6><Reviewing VCP considerations><iphbx/vcpconsiderations.htm>
<6><Installing VCP><iphbx/installvcp.htm>
<4><Preparing the PC for Operations Console><iphbx/setup.htm>
<5><Creating a customized prerequisite setup checklist><iphbx/iphbxopint.htm>
<5><Viewing the entire prerequisite setup checklist><iphbx/prereqtasks.htm>
<6><Verifying hardware requirements><iphbx/hardwarereq.htm>
<6><Verifying software requirements><iphbx/softwarereq.htm>
<6><Verifying available communications port><iphbx/verifycommport.htm>
<6><Running the prerequisite checking program><iphbx/prereqchecking.htm>
<6><Installing iSeries Access for Windows><iphbx/installca.htm>
<6><Applying iSeries Access for Windows service packs><iphbx/applyservicepacks.htm>
<6><Installing the connection modem><iphbx/conmodem.htm>
<6><Installing the PC modem><iphbx/pcmodem.htm>
<6><Confirming installation of TCP/IP><iphbx/confirmtcp.htm>
<6><Installing or configuring Remote Access Service><iphbx/installras.htm>
<6><Installing the Microsoft service pack><iphbx/installmsservicepack.htm>
<6><Granting remote access><iphbx/grantingremote.htm>
<6><Creating and configuring incoming connections><iphbx/incoming.htm>
<6><Installing a console cable><iphbx/installcable.htm>
<6><Configuring Operations Console><iphbx/installopscon.htm>
<4><Managing Operations Console><iphbx/manageopscons.htm>
<5><Managing your console configuration><iphbx/managelocal.htm>
<6><Changing a console configuration><iphbx/chngelr.htm>
<6><Deleting a console configuration><iphbx/dellr.htm>
<6><Connecting a local console to a server><iphbx/connectingserver.htm>
<7><Local console (on a network [LAN])><iphbx/connectlanlcs.htm>
<7><Local console (directly attached)><iphbx/connectattend.htm>
<7><Local console to another server><iphbx/connectanother.htm>
<6><Connecting a remote console to a local console by modem><iphbx/connectrcs.htm>
<6><Controlling tasks between users><iphbx/controltasks.htm>
<7><Identifying a user in control><iphbx/identifyuser.htm>
<7><Granting or refusing control to a remote console><iphbx/grantrefusercs.htm>
<7><Requesting and releasing control at a local console><iphbx/reqandrelatlcs.htm>
<7><Requesting control at the remote console><iphbx/requestatrcs.htm>
<7><Releasing control at the remote console><iphbx/releaseatrcs.htm>
<7><Sending a message to a controlling console><iphbx/sendmesstocntrlcon.htm>
<7><Transferring control between users><iphbx/interactions.htm>
<6><Using the properties page><iphbx/properties.htm>
<6><Customizing the display><iphbx/customizing.htm>
<5><Managing multiple Operations Consoles><iphbx/manageshared.htm>
<6><Managing multiple local consoles (on a network [LAN])><iphbx/multiplelocalconsoles.htm>
<6><Managing multiple remote consoles><iphbx/multipleremoteconsoles.htm>
<6><Switching from one console type to another><iphbx/switchconsoleavailable.htm>
<7><Changing the console that manages OS/400><iphbx/changeconsoletype.htm>
<7><Switching the console type to recover access to the system><iphbx/recoverswitch.htm>
<6><Taking over or recovering a console connection><iphbx/consoletakeoverandrecover.htm>
<7><About console take over and recovery><iphbx/abouttakerecov.htm>
<7><Considerations for enabling take over><iphbx/takeoverdetails.htm>
<7><Considerations for enabling recovery><iphbx/recoverydetails.htm>
<7><Enabling a console take over><iphbx/enableconsoletakeover.htm>
<7><Scenarios><iphbx/consolescenarios.htm>
<5><Changing the console that manages OS/400><iphbx/changeconsoletype.htm>
<6><Local console (LAN and direct)><iphbx/opstoops.htm>
<7><Direct to LAN with no HMC><iphbx/opsdirtoopslannohmc.htm>
<7><LAN to direct with no HMC><iphbx/opslantoopsdirnohmc.htm>
<7><LAN or direct with HMC><iphbx/opstoopshmc.htm>
<6><Operations Console and twinaxial console><iphbx/opstwin.htm>
<7><Operations Console to twinaxial console with no HMC><iphbx/opstotwinnohmc.htm>
<7><Operations Console to twinaxial console with HMC><iphbx/opstotwinhmc.htm>
<7><Twinaxial console to Operations Console with no HMC><iphbx/twintoopsnohmc.htm>
<7><Twinaxial console to Operations Console with HMC><iphbx/opstwin.htm>
<6><Operations Console and HMC><iphai/chgos400con.htm>
<5><Managing your local console (on a network [LAN])><iphbx/managepasswords.htm>
<6><Considerations for changing the service tools device ID passwords><iphbx/considsdw.htm>
<6><Changing the service tools device ID password><iphbx/apforwind.htm>
<6><Changing the access password><iphbx/chpssuacc.htm>
<6><Resynchronizing the PC and service tools device ID password><iphbx/resynchrpa.htm>
<7><Resetting the device ID password using another device><iphbx/recoverserveranotherdevice.htm>
<7><Resetting the device ID password using another device ID><iphbx/recoverserverunusedid.htm>
<7><Resetting the QCONSOLE device ID><iphbx/recoverserverqconsole.htm>
<7><Resetting the device ID password on the PC><iphbx/recoverpc.htm>
<6><Creating service tools device IDs><iphbx/setupid.htm>
<6><Configuring a service host name (interface name)><iphbx/setuphostname.htm>
<6><Deactivating or moving the LAN adapter><iphbx/lancard.htm>
<6><Changing network values><iphbx/chgnetvals.htm>
<5><Completing common tasks><iphbx/commonservertasks.htm>
<6><Changing keyboard definitions><iphbx/changekeyboard.htm>
<6><Starting and stopping the system><iphaj/crustopstartsys.htm>
<6><Activating the communications line><iphbx/activating.htm>
<6><Deactivating the communications line><iphbx/deactivating.htm>
<6><Using the console service functions (65+21)><iphbx/functions6521.htm>
<7><About the functions><iphbx/availcsfs.htm>
<7><How the functions work><iphbx/howcfswork.htm>
<7><Accessing the functions><iphbx/accesscsf.htm>
<7><Tracking your progress><iphbx/trackcsf.htm>
<6><Using the OPSCONSOLE native macro><iphbx/nativemacro.htm>
<6><Unlocking service tools device IDs in SST><iphbx/unlocksst.htm>
<4><Troubleshooting Operations Console connections><iphbx/troubleshooting.htm>
<5><Status messages><iphbx/troublestatus.htm>
<6><When configuration is running normally><iphbx/troublestatusnormal.htm>
<6><When you have connection problems><iphbx/troublestatuswrong.htm>
<5><Connection problems><iphbx/troubleconnection.htm>
<6><Local console connection problems><iphbx/troublelocalconnection.htm>
<7><Console connection fails><iphbx/troubleconsolefails.htm>
<7><Network connection errors><iphbx/troublenetwork.htm>
<7><Error: Connection to system is not secure><iphbx/troublesecureconnection.htm>
<7><Status remains Connecting><iphbx/troublestatusremains.htm>
<7><Console connection and port detection fails><iphbx/troubleportfails.htm>
<7><Performance degradation><iphbx/troubleperformance.htm>
<7><Unable to connect with infrared devices installed><iphbx/troubleinfrared.htm>
<7><Unexpected disconnections><iphbx/troubleunexpected.htm>
<7><Using HyperTerminal to validate connectivity><iphbx/hyperterm.htm>
<7><Resynchronizing the PC and service tools device ID password><iphbx/resynchrpa.htm>
<6><Remote console connection problems><iphbx/troubleremoteconnection.htm>
<7><Remote console connection fails><iphbx/troubleremotedu.htm>
<7><Local console name mismatch><iphbx/troublenamemismatch.htm>
<5><Authentication problems><iphbx/troubleauth.htm>
<6><Errors><iphbx/troubleauthentication.htm>
<6><Errors with Windows NT Service Pack 6><iphbx/troubleerrorsnt.htm>
<5><Emulator problems><iphbx/troubleemulator.htm>
<6><Local console emulator goes to Disconnected state><iphbx/troubleemulatorfails.htm>
<6><PC5250 window does not display user data><iphbx/troublepc5250.htm>
<5><System reference code (SRC) data><iphbx/troublesrc.htm>
<6><A600500A, A600500B, A600500C, A600500D, B600500A, B600500B, B600500C, and B600500D><iphbx/a600500a.htm>
<6><A6005001, A6005004, A6005007, B6005001, B6005004, and B6005007><iphbx/troublesrccodes.htm>
<6><A6005008 and B6005008><iphbx/troublesrccoded.htm>
<6><A9002000><iphbx/troublesrccodea.htm>
<6><A6005082><iphbx/troubledisappear.htm>
<6><0000DDDD><iphbx/troublesrccode00dd.htm>
<6><Failure to display D1008065 and D1008066><iphbx/troublepost.htm>
<6><IPL step C6004031 takes longer than expected><iphbx/troubleiplstep.htm>
<5><RCP and VCP problems><iphbx/troublecontrolpanels.htm>
<6><RCP fails to start><iphbx/troublercp.htm>
<6><Unable to use the mode function><iphbx/troublemodefunction.htm>
<6><VCP authentication errors><iphbx/vcptroubleshoot.htm>
<5><Configuration wizard problems><iphbx/troublewizard.htm>
<6><Local console does not detect cables><iphbx/troubledetectcable.htm>
<6><Old network data interfering with reconfiguration><iphbx/troublereconfig.htm>
<6><Unable to find correct modem><iphbx/troublemodem.htm>
<5><Other problems><iphbx/troubleother.htm>
<6><Console remains in QCTL><iphbx/troubleqctl.htm>
<6><Message: Remote Access Service server did not start><iphbx/troublerasmessage.htm>
<6><System requests will not work><iphbx/troublesysreq.htm>
<4><Related information><iphbx/relatedinfo.htm>
# End of navigation data from: iphbx/iphbxtoc.xml
# Start of navigation data from: iphbn/iphbntoc.xml
<3><Twinaxial console><iphbn/kickoff.htm>
<4><Printable PDFs><iphbn/printpdf.htm>
<4><Twinaxial console in an IBM eServer environment><iphbn/twxfitseserver.htm>
<4><Setting up a twinaxial console><iphbn/setupchklst.htm>
<4><Changing the console that manages OS/400><iphbn/changeconsoletwin.htm>
<4><Related information><iphbn/relatedinfo.htm>
# End of navigation data from: iphbn/iphbntoc.xml
<3><Graphics terminal><iphai/graphics.htm>
# End of navigation data from: iphai/iphaitoc.xml
# Start of navigation data from: iphaj/iphajtoc.xml
<2><Installing features and replacing parts><iphaj/installcifcio.htm>
<3><What's new><iphaj/whatsnew.htm>
<3><Select by model or expansion unit><iphaj/selectmodel.htm>
<4><520><iphaj/iphw2.htm>
<4><550><iphaj/iphw4.htm>
<4><570><iphaj/iphwm.htm>
<4><590 and 595><iphaj/hwiph.htm>
<4><9110-510><iphaj/hv2b70.htm>
<4><9118-575><iphaj/ih.htm>
<4><9411-100><iphaj/eu9411.htm>
<4><5074 and 5079><iphaj/ipheu5074.htm>
<4><5088 and 0588><iphaj/ipheu5088.htm>
<4><5094 and 5294><iphaj/ipheu5094.htm>
<4><5095 and 0595><iphaj/ipheu5095.htm>
<4><5794, 5791, and 7040-61D><iphaj/ipheu5794.htm>
<4><7311-D11, 7311-D10, and 5790><iphaj/ipheu7311d11.htm>
<4><7311-D20><iphaj/ipheu7311d20.htm>
<4><OpenPower><iphaj/openpower.htm>
<3><Select by feature or part><iphaj/selectcifcio.htm>
# End of navigation data from: iphaj/iphajtoc.xml
# End of navigation data from: iphag/iphagtoc.xml
# Start of navigation data from: iphat/iphattoc.xml
<1><Rozdělení serveru na logické části><iphat/iphatlparkickoff.htm>
<2><Co je nového><iphat/iphatwhatsnew.htm>
<2><Tisknutelné dokumenty a publikace ve formátu PDF><iphat/iphatprintpdfs.htm>
<2><Koncepce týkající se rozdělování serveru na logické části><iphat/iphatlparconceptskickoff.htm>
<3><Přínosy rozdělování na logické části><iphat/iphatlparbenefits.htm>
<3><Typy konfigurace logických částí><iphat/iphatlpartypes.htm>
<4><Logické části><iphat/iphatlparchoices.htm>
<4><Předvolená konfigurace nastavená výrobcem><iphat/iphatlparmgc.htm>
<4><Servisní logická část><iphat/iphatservicelpar.htm>
<4><Logická část virtuálního I/O serveru><iphat/iphatvirtualioserveroverview.htm>
<3><Komponenty logické části><iphat/iphatlparcomponents.htm>
<4><Spravované systémy><iphat/iphatmanagesys.htm>
<4><Profily><iphat/iphatlparprofiles.htm>
<5><Profil logické části><iphat/iphatparprofile.htm>
<5><Profily logických částí, které využívají všechny systémové prostředky><iphat/iphatfullsystem.htm>
<5><Profil systému><iphat/iphatsysprofile.htm>
<3><Hardwarové prostředky><iphat/iphatlparhw.htm>
<4><Minimální konfigurace><iphat/iphatlparosmin.htm>
<5><AIX><iphat/iphbkaixminreqs.htm>
<5><i5/OS><iphat/iphbllparosmin.htm>
<5><Linux><iphat/iphbiminimumconfig.htm>
<4><Fyzické a virtuální hardwarové prostředky><iphat/iphatphysicalvsvirtual.htm>
<5><Virtuální adaptéry><iphat/iphbivirtualadapters.htm>
<5><Jak jednotlivé operační systémy implementují virtuální prostředky><iphat/iphatosvirtualoverview.htm>
<6><AIX><iphat/iphataixvirtual.htm>
<6><i5/OS><iphat/iphati5osvirtual.htm>
<7><Virtuální sériové adaptéry><iphat/iphbivirtualserial.htm>
<7><Virtuální SCSI><iphat/iphbivirtualscsi.htm>
<6><Linux><iphat/iphatlinuxvirtual.htm>
<5><Procesory><iphat/iphatlparprocessor.htm>
<6><Vyhrazené procesory><iphat/iphatdedproc.htm>
<6><Sdílené procesory><iphat/iphatsharedproc.htm>
<7><Virtuální procesory><iphat/iphatvirtualproc.htm>
<7><Pokyny k licenčním smlouvám na operační systém i5/OS><iphat/iphblos400license.htm>
<5><Paměť><iphat/iphatlparmemory.htm>
<6><Paměť pro logické části operačního systému AIX><iphat/iphbkaixmemreqs.htm>
<6><Paměť pro logické části operačního systému i5/OS><iphat/iphbllparmemory.htm>
<6><Paměť pro logické části operačního systému Linux><iphat/iphbilinuxmemory.htm>
<5><Rozšíření základní jednotky><iphat/iphatexpansionunit.htm>
<5><Konzole><iphat/iphatlparconsole.htm>
<6><HMC><iphat/iphathmc.htm>
<6><Operations Console><iphat/iphatoperationsconsole.htm>
<6><Twinaxiální konzole><iphat/iphattwinax.htm>
<5><I/O><iphat/iphbliodevices.htm>
<6><Společné oblasti I/O><iphat/iphbliopools.htm>
<6><Procesory IOP><iphat/iphbllpariop.htm>
<7><Označené prostředky><iphat/iphbltag.htm>
<7><Přepínatelná zařízení><iphat/iphblswitchiop.htm>
<6><Adaptéry IOA><iphat/iphbllparioa.htm>
<7><Zaváděcí zdroj><iphat/iphblloadsrc.htm>
<7><Alternativní zařízení pro opakované spuštění><iphat/iphblaltipl.htm>
<7><Disková jednotka><iphat/iphbldunit.htm>
<5><5250 CPW><iphat/iphblinterperform.htm>
<3><Volby komunikace pro logické části><iphat/iphatlparcommunication.htm>
<4><Virtuální síť Ethernet><iphat/iphatvirtualethernetoverview.htm>
<5><Virtuální síť Ethernet pro AIX><iphat/iphatvirtualethernetaix.htm>
<5><Virtuální síť Ethernet pro i5/OS><iphat/iphatvirtualetherneti5os.htm>
<5><Virtuální síť Ethernet pro Linux><iphat/iphatvirtualethernetlinux.htm>
<4><HSL OptiConnect><iphat/iphblhslopticonnect.htm>
<4><Virtual OptiConnect><iphat/iphblvirtualopticonnect.htm>
<3><Obslužné programy pro logické části><iphat/iphatlparutilities.htm>
<4><Nástroj pro ověření platnosti LPAR><iphat/iphatlvt.htm>
<4><Partition Load Manager><iphat/iphatplmoverview.htm>
# Start of navigation data from: iphbk/iphbktoc.xml
<2><Partitioning for AIX><iphbk/iphbkaixkickoff.htm>
<3><What's new><iphbk/iphbkaixwhatsnew.htm>
<3><Printable PDFs><iphbk/iphbkprintthis.htm>
<3><Scenarios><iphbk/iphbkaixscenarios.htm>
<3><Planning for AIX logical partitions><iphae/aixpartitions.htm>
<3><Configuring AIX logical partitions><iphbk/iphbkaixconfigure.htm>
<4><Creating logical partitions and partition profiles><iphbl/iphblcreatelpar.htm>
<4><Creating additional partition profiles><iphbl/iphblcreateprofile.htm>
<4><Designating a service partition for your managed system><iphbl/iphblservicepartition.htm>
<4><Creating partitions from the manufacturing default configuration><iphbl/iphbldefaultlpar.htm>
<5><i5 servers><iphbl/iphbldefaultlpari5.htm>
<5><p5 servers><iphbl/iphbldefaultlparp5.htm>
<4><Migrating AIX logical partitions><iphbk/iphbkaixmigrate.htm>
<4><Copying a partition profile><iphbl/iphblcopyprofile.htm>
<4><Creating a system profile><iphbl/iphblsysprofile.htm>
<4><Copying a system profile><iphbl/iphblcopysysp.htm>
<4><Creating an AIX partition that receives i5/OS resources><iphbl/iphblaixpartition.htm>
<4><Deleting a logical partition><iphbl/iphbldeletelpar.htm>
<4><Resetting the server><iphbl/iphblresetserver.htm>
<3><Configuring resource management for AIX partitions using Partition Load Manager><iphbk/iphbkconfigureplm.htm>
<4><Installing Partition Load Manager><iphbk/iphbkinstplm.htm>
<4><Installing OpenSSH software tools><iphbk/iphbkopenssh.htm>
<4><Configuring Resource Management and Control><iphbk/iphbkrmc_configuration.htm>
<4><Configuring the policy file><iphbk/iphbkpolicy_file_configuration.htm>
<4><Verifying the installation and configuration><iphbk/iphbkverifyinst.htm>
<5><Verifying the OpenSSH installation><iphbk/iphbkverifysshinst.htm>
<5><Verifying the Resource Management and Control configuration><iphbk/iphbkverifyrmc.htm>
<3><Managing AIX logical partitions><iphbk/iphbkaixmanage.htm>
<4><Managing partition profiles for logical partitions><iphbk/iphblmanagepprofile.htm>
<5><Activating a partition profile><iphbk/iphblactivate.htm>
<5><Changing partition profile properties><iphbk/iphblchangeprofile.htm>
<5><Deleting a partition profile><iphbk/iphbldeleteprofile.htm>
<4><Managing system profiles for logical partitions><iphbk/iphblmanagesprofile.htm>
<5><Activating a system profile><iphbk/iphblactivatesysprofile.htm>
<5><Deleting a system profile><iphbk/iphbldeletesysprofile.htm>
<4><Dynamically managing AIX logical partition resources><iphbk/iphbkaixmanagedynamic.htm>
<5><Dynamically managing physical I/O devices or slots><iphbk/iphbldlpariop.htm>
<5><Dynamically managing processing power><iphbk/iphbldlparprocpower.htm>
<5><Dynamically managing memory><iphbk/iphbldlparmemory.htm>
<5><Scheduling dynamic resource movement><iphbk/iphblschedulelpar.htm>
<4><Managing partitions remotely><iphbk/iphblpartitionremote.htm>
<4><Querying partition status><iphbk/iphbkquerystatus.htm>
<4><Managing AIX partitions using i5/OS><iphbk/iphblaixmanagingkickoff.htm>
<5><Adding virtual disks to an AIX partition><iphbk/iphbldynamicallyaddingaixdisks.htm>
<5><Managing network server descriptions><iphbk/iphblaixnwsdoverview.htm>
<6><Linking NWSSTG among NSWDs><iphbk/iphblaixlinknwsstg.htm>
<6><Deleting NSWDs><iphbk/iphblaixdeletenwsd.htm>
<6><Deleting disk drives><iphbk/iphblaixdelete.htm>
<5><Using IPL types when running AIX><iphbk/iphblaixbootsource.htm>
<5><Backing up and recovering AIX partitions that receive i5/OS resources><iphbk/iphblaixrecoverykickoff.htm>
<6><Using the tar command><iphbk/iphblaixsavrstaixtar.htm>
<6><Using i5/OS commands><iphbk/iphblos400commandaix.htm>
<5><Backing up the NWSD and disk drives associated with AIX><iphbk/iphblaixbackup.htm>
<6><Backing up NWSDs for an AIX partition><iphbk/iphblaixbackupnwsd.htm>
<6><Restoring NWSDs for an AIX partition><iphbk/iphblaixrestore.htm>
<6><Unlinking disk drives from an AIX partition><iphbk/iphblaixunlink.htm>
<7><Saving server objects in i5/OS><iphbk/iphblaixobjects.htm>
<4><Backing up and recovering AIX logical partitions><iphbk/iphbkaixbackup.htm>
<4><Getting fixes><iphbk/iphbkgettingfixes.htm>
<3><Using AIX installed on a logical partition><iphbk/iphbkaixuse.htm>
<4><Restarting and shutting down AIX in a logical partition><iphbk/iphbkshutdownaix.htm>
<5><Shutting down using the HMC><iphbk/iphbkshutdownhmc.htm>
<5><Restarting AIX logical partitions><iphbk/iphbkrestartaix.htm>
<4><Managing security><iphbk/iphbksecuritylpar.htm>
<4><Managing performance><iphbk/iphbkperformancelpar.htm>
<3><Troubleshooting><iphbk/iphbkaixtroubleshoot.htm>
<4><Reference codes for logical partitions><iphbl/iphblosrefcode.htm>
<3><Related information><iphbk/iphbkaixrelated.htm>
# End of navigation data from: iphbk/iphbktoc.xml
# Start of navigation data from: iphbl/iphbltoc.xml
<2><Systém i5/OS a rozdělování na logické části><iphbl/iphbllparos400kickoff.htm>
<3><Co je nového><iphbl/iphblwhatsnew.htm>
<3><Tisk souborů ve formátu PDF><iphbl/iphblprintpdfs.htm>
<3><Scénáře><iphbl/iphblscenarioskickoff.htm>
<3><Plánování logických částí s operačním systémem i5/OS><iphbl/iphblplanos400.htm>
<3><Konfigurace logických částí s operačním systémem i5/OS><iphbl/iphblconfigurelpar.htm>
<4><Vytváření logických částí a profilů logických částí><iphbl/iphblcreatelpar.htm>
<4><Vytváření dalších profilů logických částí><iphbl/iphblcreateprofile.htm>
<4><Určení servisní logické části pro spravovaný systém><iphbl/iphblservicepartition.htm>
<4><Vytvoření logických částí z předvolené konfigurace nastavené výrobcem><iphbl/iphbldefaultlpar.htm>
<5><Servery i5><iphbl/iphbldefaultlpari5.htm>
<5><Servery p5><iphbl/iphbldefaultlparp5.htm>
<4><Migrace logických částí s operačním systémem i5/OS><iphbl/iphblmigrateos400.htm>
<4><Kopírování profilu logické části><iphbl/iphblcopyprofile.htm>
<4><Vytvoření profilu systému><iphbl/iphblsysprofile.htm>
<4><Kopírování profilu systému><iphbl/iphblcopysysp.htm>
<4><Vytvoření logické části s operačním systémem AIX, která využívá virtuální I/O prostředky systému i5/OS><iphbl/iphblaixpartition.htm>
<5><Vytvoření NWSD a paměťového prostoru síťového serveru><iphbl/iphblaixnwsd.htm>
<5><Připojení k virtuální konzoli><iphbl/iphblaixvirtualconsole.htm>
<5><Spuštění a zastavení NWSD><iphbl/iphblvaryonaix.htm>
<4><Vytvoření logické části s operačním systémem Linux, která používá virtuální I/O prostředky systému i5/OS><iphbl/iphblioserverpartition.htm>
<5><Vytvoření NWSD a paměťového prostoru síťového serveru><iphbl/iphblnwsd.htm>
<5><Připojení k virtuální konzoli><iphbl/iphblvirtualconsole.htm>
<5><Spuštění a zastavení NWSD><iphbl/iphblvaryon.htm>
<4><Odstranění logické části><iphbl/iphbldeletelpar.htm>
<4><Resetování serveru><iphbl/iphblresetserver.htm>
<3><Správa logických částí s operačním systémem i5/OS><iphbl/iphblmanageos400.htm>
<4><Správa profilů logických částí><iphbl/iphblmanagepprofile.htm>
<5><Aktivace profilu logické části><iphbl/iphblactivate.htm>
<5><Změna vlastností profilu logické části><iphbl/iphblchangeprofile.htm>
<5><Odstranění profilu logické části><iphbl/iphbldeleteprofile.htm>
<4><Správa profilů systému><iphbl/iphblmanagesprofile.htm>
<5><Aktivace profilu systému><iphbl/iphblactivatesysprofile.htm>
<5><Odstranění profilu systému><iphbl/iphbldeletesysprofile.htm>
<4><Dynamická správa prostředků logické části><iphbl/iphblmanageos400movement.htm>
<5><Dynamická správa 5250 CPW><iphbl/iphbldlparinteractive.htm>
<5><Dynamická správa fyzických I/O zařízení a slotů><iphbl/iphbldlpariop.htm>
<5><Dynamická správa paměti><iphbl/iphbldlparmemory.htm>
<5><Dynamická správa výkonu zpracování><iphbl/iphbldlparprocpower.htm>
<5><Plánování dynamického přesouvání prostředků><iphbl/iphblschedulelpar.htm>
<4><Vzdálená správa logických částí><iphbl/iphblpartitionremote.htm>
<4><Instalace nového hardwaru u logických částí s operačním systémem i5/OS><iphbl/iphblinstallos400hw.htm>
<4><Správa logických částí s operačním systémem AIX, která využívá prostředků i5/OS><iphbl/iphblaixmanagingkickoff.htm>
<5><Přidávání virtuálních diskových jednotek k logické části s operačním systémem AIX><iphbl/iphbldynamicallyaddingaixdisks.htm>
<5><Správa popisu síťového serveru><iphbl/iphblaixnwsdoverview.htm>
<6><Propojení paměťového prostoru síťového serveru s několika NWSD><iphbl/iphblaixlinknwsstg.htm>
<6><Odstranění NWSD u logické části><iphbl/iphblaixdeletenwsd.htm>
<6><Odstranění virtuálních diskových jednotek><iphbl/iphblaixdelete.htm>
<5><Použití typů IPL u operačního systému AIX><iphbl/iphblaixbootsource.htm>
<5><Zálohování a obnova logických částí s operačním systémem AIX><iphbl/iphblaixrecoverykickoff.htm>
<6><Použití příkazu tar><iphbl/iphblaixsavrstaixtar.htm>
<6><Použití příkazů operačního systému i5/OS><iphbl/iphblos400commandaix.htm>
<5><Zálohování NWSD a virtuálních diskových jednotek asociovaných s logickou částí s operačním systémem AIX><iphbl/iphblaixbackup.htm>
<6><Zálohování NWSD pro logickou část s operačním systémem AIX><iphbl/iphblaixbackupnwsd.htm>
<6><Obnova NWSD pro logickou část s operačním systémem AIX><iphbl/iphblaixrestore.htm>
<6><Odpojení diskových jednotek od logické části s operačním systémem AIX><iphbl/iphblaixunlink.htm>
<7><Ukládání objektů serveru v operačním systému i5/OS><iphbl/iphblaixobjects.htm>
<4><Správa logických částí s operačním systémem Linux, která používá prostředky systému i5/OS><iphbl/iphblmanagingkickoff.htm>
<5><Přidání virtuálních diskových jednotek logické části s operačním systémem Linux><iphbl/iphbldynamicallyaddingdisks.htm>
<5><Správa popisu síťového serveru><iphbl/iphblnwsdoverview.htm>
<6><Propojení paměťového prostoru síťového serveru s několika NWSD><iphbl/iphbllinknwsstg.htm>
<6><Odstranění NWSD u logické části><iphbl/iphbldeletenwsd.htm>
<6><Odstranění virtuálních diskových jednotek><iphbl/iphbldelete.htm>
<5><Použití typu IPL při provozování operačního systému Linux><iphbl/iphblbootsource.htm>
<5><Zálohování a obnova logických částí s operačním systémem Linux><iphbl/iphblrecoverykickoff.htm>
<6><Použití příkazu tar><iphbl/iphblsavrstaixtar.htm>
<6><Použití příkazů operačního systému i5/OS><iphbl/iphblos400command.htm>
<5><Zálohování NWSD a virtuálních diskových jednotek asociovaných s logickou částí s operačním systémem Linux><iphbl/iphblbackup.htm>
<6><Vytvoření záložního obrazu v NWSSTG><iphbl/iphblrecoverimage.htm>
<6><Použití záložního obrazu z NWSSTG><iphbl/iphblrecoverysystem.htm>
<6><Zálohování NWSD pro logickou část s operačním systémem Linux><iphbl/iphblbackupnwsd.htm>
<6><Obnova NWSD pro logickou část s operačním systémem Linux><iphbl/iphblrestore.htm>
<6><Odpojování diskových jednotek od logické části s operačním systémem Linux><iphbl/iphblunlink.htm>
<7><Ukládání objektů serveru v operačním systému i5/OS><iphbl/iphblobjects.htm>
<4><Získávání oprav><iphbl/iphblgettingfixes.htm>
<3><Práce s operačním systémem  i5/OS nainstalovaným v logické části><iphbl/iphblusingi5os.htm>
<4><Opětovné spuštění a ukončení práce operačního systému i5/OS v logické části><iphbl/iphblrestartos400.htm>
<5><Ukončení operačního systému i5/OS><iphbl/iphblpowerdownos400.htm>
<6><Ukončení operačního systému pomocí konzole HMC><iphbl/iphblsdlparhmc.htm>
<6><Ukončení operačního systému pomocí produktu Operations Console><iphbl/iphblsdlparoc.htm>
<5><Změna provozního režimu logické části s operačním systémem i5/OS><iphbl/iphblos400mode.htm>
<5><Změna typu IPL u logické části s operačním systémem i5/OS><iphbl/iphblos400iplsource.htm>
<4><Správa zabezpečení><iphbl/iphblsecuritylpar.htm>
<4><Zálohování a obnova dat v systému i5/OS><iphbl/iphblos400backupandrecovery.htm>
<4><Dopady na výkon operačního systému i5/OS><iphbl/iphblos400performanceimpacts.htm>
<3><Odstraňování problémů><iphbl/iphbltroubleshootos400.htm>
<4><Referenční kódy pro logické části><iphbl/iphblosrefcode.htm>
<4><Odstraňování problémů u logických částí s operačním systémem AIX><iphbl/iphblaixtroubleshootingkickoff.htm>
<5><Ladění chybových zpráv NWSD><iphbl/iphblaixnwsderrors.htm>
<4><Odstraňování problémů u logických částí s operačním systémem Linux><iphbl/iphbltroubleshootingkickoff.htm>
<5><Ladění chybových zpráv NWSD><iphbl/iphblnwsderrors.htm>
<5><Odstraňování problémů s virtuálním páskovým zařízením systému Linux><iphbl/iphbltsaixtape.htm>
<4><Situace vyžadující pomoc autorizovaného poskytovatele služeb><iphbl/iphblservicerep.htm>
<5><Výpis hlavní paměti v logických částech s operačním systémem i5/OS><iphbl/iphblperformsd.htm>
<5><Použití vzdálené služby pro logické části s operačním systémem i5/OS><iphbl/iphblremoteservice.htm>
<5><Ukončení domény napájení s logickými částmi><iphbl/iphbldomain.htm>
<5><Resetování procesoru IOP diskové jednotky s logickými částmi s operačním systémem i5/OS><iphbl/iphblresetunit.htm>
<3><Související informace><iphbl/iphbllparrelated.htm>
# End of navigation data from: iphbl/iphbltoc.xml
# Start of navigation data from: iphbi/iphbi02.xml
<2><Partitioning for Linux><iphbi/iphbikickoff.htm>
<3><What's new><iphbi/iphbiwhatnew.htm>
<3><Printable PDFs><iphbi/iphbiprintthis.htm>
<3><Concepts for Linux logical partitions><iphbi/iphbiconcept.htm>
<4><Hardware requirements for Linux logical partitions><iphbi/iphbihardware.htm>
<5><Supported hardware resources><iphbi/iphbidrivers.htm>
<5><Minimum configuration requirements><iphbi/iphbiminimumconfig.htm>
<5><Shared processor support><iphbi/iphbishared.htm>
<5><Console requirements><iphbi/iphbiconsole.htm>
<5><Storage options><iphbi/iphbistorage.htm>
<4><Virtual I/O devices><iphbi/iphbivirtualnative.htm>
<4><Communications options><iphbi/iphbinetworking.htm>
<4><Linux distributions><iphbi/iphbipowerlinux.htm>
<3><Scenarios for Linux logical partitions><iphbi/iphbiscenario.htm>
<4><Scenario: Using partition profiles><iphat/iphatscenario1.htm>
<4><Scenario: Using system profiles><iphat/iphatscenario2.htm>
<4><Scenario: Server consolidation><iphbi/iphbiserver.htm>
<4><Scenario: Capacity Upgrade on Demand><iphbi/iphbicuod.htm>
<4><Scenario: Creating a Linux logical partition and partition profile><iphbi/iphbilinuxscenario.htm#iphbilinuxscenario>
<3><Plan for Linux logical partitions><iphae/linuxpartitions.htm>
<3><Configuring Linux logical partitions><iphbi/iphbiconfig.htm>
<4><Creating a logical partition><iphbl/iphblcreatelpar.htm>
<4><Creating a partition profile><iphbl/iphblcreateprofile.htm>
<4><Creating partitions from the manufacturing default configuration><iphbi/iphbidefaultlparlinux.htm>
<5><i5 servers><iphbi/iphbldefaultlpari5.htm>
<5><p5 servers><iphbi/iphbldefaultlparp5.htm>
<5><OpenPower servers><iphbi/iphbidefaultlparop.htm>
<4><Migrating Linux logical partitions><iphbi/iphbimigration.htm>
<5><Migrating a Linux installation from iSeries to IBM eServer i5><iphbi/iphbimigratiseries.htm>
<5><Migrating a Linux installation from pSeries to IBM eServer p5><iphbi/iphbimigratpseries.htm>
<4><Copying a partition profile><iphbl/iphblcopyprofile.htm>
<4><Creating a system profile><iphbl/iphblsysprofile.htm>
<4><Copying a system profile><iphbl/iphblcopysysp.htm>
<4><Creating a logical partition using the i5/OS integrated virtual I/O server><iphbl/iphblioserverpartition.htm>
<3><Managing Linux logical partitions><iphbi/iphbimanage.htm>
<4><Managing partition profiles><iphbl/iphblmanagepprofile.htm>
<5><Activating a partition profile><iphbl/iphblactivate.htm>
<5><Deleting a partition profile><iphbi/iphbldeleteprofile.htm>
<4><Managing system profiles><iphbl/iphblmanagesprofile.htm>
<5><Activating a system profile><iphbl/iphblactivatesysprofile.htm>
<5><Deleting a system profile><iphbl/iphbldeletesysprofile.htm>
<4><Dynamically managing logical partition resources><iphbi/iphbilinuxmanagedynamic.htm>
<5><Dynamically managing physical I/O devices><iphbi/iphbilinuxdlpario.htm>
<5><Dynamically managing processing power><iphbi/iphbilinuxdlparprocpower.htm>
<4><Managing partitions remotely><iphbl/iphblpartitionremote.htm>
<4><Managing logical partition and operating system security><iphbl/iphblsecuritylpar.htm>
<4><Application support><iphbi/iphbiappsupport.htm>
<5><Samba support with i5/OS Netserver><iphbi/iphbinetserver.htm>
<5><Accessing i5/OS data using the Linux ODBC driver><iphbi/iphbiodbc.htm>
<4><Backing up and recovering Linux installations><iphbi/iphbibackup.htm>
<5><Managing logical partitions that use the i5/OS integrated virtual I/O server><iphbl/iphblmanagingkickoff.htm>
<5><Backing up and recovering Linux on pSeries><iphbi/iphbibackuppseries.htm>
<3><Using Linux installed on a logical partition><iphbi/iphbilinuxuse.htm>
<4><Restarting and shutting down Linux in a logical partition><iphbi/iphbishutdownlinux.htm>
<5><Restarting Linux logical partitions><iphbi/iphbirestartlinux.htm>
<5><Shutting down using the HMC><iphbi/iphbishutdownhmc.htm>
<3><Troubleshooting Linux logical partitions><iphbi/iphbitrouble.htm>
<3><Related information><iphbi/iphbirelated.htm>
# End of navigation data from: iphbi/iphbi02.xml
# Start of navigation data from: iphb1/iphb1toc.xml
<2><Použití virtuálního I/O serveru><iphb1/iphb1kickoff.htm>
<3><Printable PDFs><iphb1/iphb1_vios_printthis.htm>
<3><Concepts for the Virtual I/O Server><iphb1/iphb1_vios_concepts.htm>
<4><Virtual I/O Server command line interface><iphb1/iphb1_vios_concepts_cli.htm>
<4><User types><iphb1/iphb1_vios_concepts_user.htm>
<4><Concepts for virtual networking><iphb1/iphb1_vios_concepts_network.htm>
<5><Introduction to virtual networking><iphb1/iphb1_vios_concepts_network_intro.htm>
<5><Link Aggregation><iphb1/iphb1_vios_concepts_network_lnagg.htm>
<5><Virtual local area networks (VLAN)><iphb1/iphb1_vios_concepts_network_vlan.htm>
<5><Virtual Ethernet adapters><iphb1/iphb1_vios_concepts_network_venet.htm>
<5><Shared Ethernet adapters><iphb1/iphb1_vios_concepts_network_sea.htm>
<4><Concepts for virtual SCSI><iphb1/iphb1_vios_concepts_stor.htm>
<5><Virtual SCSI device types><iphb1/iphb1_vios_concepts_stor_types.htm>
<5><Logical volume storage overview><iphb1/iphb1_vios_concepts_stor_lvovw.htm>
<5><Physical volumes><iphb1/iphb1_vios_concepts_stor_pv.htm>
<5><Volume groups><iphb1/iphb1_vios_concepts_stor_vg.htm>
<5><Physical partitions><iphb1/iphb1_vios_concepts_stor_pp.htm>
<5><Logical partitions><iphb1/iphb1_vios_concepts_stor_lp.htm>
<5><Quorums><iphb1/iphb1_vios_concepts_stor_quorum.htm>
<3><Scenarios for the Virtual I/O Server><iphb1/iphb1_vios_scenarios.htm>
<4><Scenario: Configuring a Virtual I/O Server without VLAN tagging><iphb1/iphb1_vios_scenarios_network_one.htm>
<4><Scenario: Configuring a Virtual I/O Server using VLAN Tagging><iphb1/iphb1_vios_scenarios_network_two.htm>
<4><Scenario: Configuring multiple Virtual I/O Server partitions without VLAN tagging><iphb1/iphb1_vios_scenarios_novlan.htm>
<4><Scenario: Configuring multiple Virtual I/O Server partitions using VLAN Tagging><iphb1/iphb1_vios_scenarios_vlan.htm>
<3><Planning for the Virtual I/O Server><iphb1/iphb1_vios_planning.htm>
<4><Capacity planning><iphb1/iphb1_vios_planning_cap.htm>
<4><Planning for Shared Ethernet adapter><iphb1/iphb1_vios_planning_network.htm>
<5><Network requirements><iphb1/iphb1_vios_planning_bandwidth.htm>
<5><Shared Ethernet adapter sizing considerations><iphb1/iphb1_vios_planning_sea_sizing.htm>
<6><Adapter selection><iphb1/iphb1_vios_planning_sea_adapter.htm>
<6><Processor allocation><iphb1/iphb1_vios_planning_sea_procs.htm>
<6><Memory allocation><iphb1/iphb1_vios_planning_sea_memory.htm>
<4><Planning for Virtual SCSI><iphb1/iphb1_vios_planning_vscsi.htm>
<5><Virtual SCSI latency><iphb1/iphb1_vios_planning_vscsi_latency.htm>
<5><Virtual SCSI bandwidth><iphb1/iphb1_vios_planning_vscsi_bandwidth.htm>
<5><Virtual SCSI sizing considerations><iphb1/iphb1_vios_planning_vscsi_sizing.htm>
<4><High availability considerations><iphb1/iphb1_vios_planning_ha.htm>
<5><Client partitions><iphb1/iphb1_vios_planning_ha_client.htm>
<5><Virtual I/O Server partition><iphb1/iphb1_vios_planning_ha_server.htm>
<4><Security><iphb1/iphb1_vios_planning_sec.htm>
<4><Restrictions><iphb1/iphb1_vios_planning_res.htm>
<3><Installing the Virtual I/O Server><iphb1/iphb1_vios_configuring.htm>
<4><Entering the Virtual I/O Server activation code><iphb1/iphb1_vios_configuration_inputcode.htm>
<4><Creating the Virtual I/O Server logical partition and partition profile><iphb1/iphb1_vios_configuring_partition.htm>
<4><Installing the Virtual I/O Server><iphb1/iphb1_vios_configuring_install.htm>
<5><Installing the I/O Server from the HMC><iphb1/iphb1_vios_configuring_installhmc.htm>
<5><Installing the I/O Server from CD or DVD><iphb1/iphb1_vios_configuring_installcd.htm>
<3><Managing the Virtual I/O Server><iphb1/iphb1_vios_managing.htm>
<4><Managing user types on the Virtual I/O Server><iphb1/iphb1_vios_managing_users.htm>
<4><Managing shared Ethernet adapter><iphb1/iphb1_vios_managing_sea.htm>
<5><Configuring shared Ethernet adapter><iphb1/iphb1_vios_configuring_sea.htm>
<5><Configuring Link Aggregation><iphb1/iphb1_vios_managing_lnagg.htm>
<5><Network attributes><iphb1/iphb1_vios_managing_sea_attr.htm>
<4><Managing virtual SCSI><iphb1/iphb1_vios_managing_vscsi.htm>
<5><Creating the virtual target device on the Virtual I/O Server><iphb1/iphb1_vios_managing_vscsi_targ.htm>
<5><Creating logical volumes and volume groups on the Virtual I/O Server><iphb1/iphb1_vios_managing_vscsi_vg.htm>
<5><Mapping virtual disks to physical disks><iphb1/iphb1_vios_managing_mapping.htm>
<4><Maintaining the Virtual I/O Server><iphb1/iphb1_vios_managing_maintain.htm>
<5><Importing or exporting a volume group><iphb1/iphb1_vios_managing_vscsi_impexp.htm>
<5><Updating the Virtual I/O Server><iphb1/iphb1_vios_managing_updating.htm>
<5><Backing up and restoring the Virtual I/O Server><iphb1/iphb1_vios_backup.htm>
<6><Backing up><iphb1/iphb1_vios_backup_backup.htm>
<7><Backing up to tape><iphb1/iphb1_vios_backup_tape.htm>
<7><Backing up to remote file system><iphb1/iphb1_vios_backup_filesystem.htm>
<7><Backing up to CD or DVD><iphb1/iphb1_vios_backup_cddvd.htm>
<6><Restoring><iphb1/iphb1_vios_backup_restore.htm>
<7><Restoring from tape><iphb1/iphb1_vios_backup_restore_tape.htm>
<7><Restoring from remote file system><iphb1/iphb1_vios_backup_restore_file.htm>
<7><Restoring from CD or DVD><iphb1/iphb1_vios_backup_restore_cddvd.htm>
<5><Monitoring the Virtual I/O Server><iphb1/iphb1_vios_managing_maintain_monitor.htm>
<3><Troubleshooting the Virtual I/O Server><iphb1/iphb1_vios_troubleshooting.htm>
<4><Virtual I/O Server problems><iphb1/iphb1_vios_troubleshooting_serv.htm>
<5><Virtual SCSI problems><iphb1/iphb1_vios_troubleshooting_serv_vscsi.htm>
<5><Networking problems><iphb1/iphb1_vios_troubleshooting_network.htm>
<4><Client partition problems><iphb1/iphb1_vios_troubleshooting_client.htm>
<3><Related Information><iphb1/iphb1_vios_related.htm>
# End of navigation data from: iphb1/iphb1toc.xml
<2><Související informace><iphat/iphatlparrelated.htm>
# End of navigation data from: iphat/iphattoc.xml
<1><Instalace operačních systémů><iphaw/kickoff.htm>
<2><Instalace operačního systému AIX><iphay/iphayinstallaix.htm>
<2><Instalace operačního systému i5/OS><iphax/iphaxinstallos400.htm>
<2><Instalace operačního systému Linux><iphaz/iphazinstalllinux.htm>
<3><Příprava na instalaci operačního systému Linux><iphaz/iphazprepareforinstall.htm>
<3><Instalace distribuce operačního systému Linux><iphaz/iphazinstalldistro.htm>
<3><Instalace dodatečného softwaru pro Linux><iphaz/iphazinstallrpms.htm>
# Start of navigation data from: ipha1/ipha1toc.xml
<1><Managing your server><ipha1/kick.htm>
<2><Hardware Management Console><ipha1/hardwaremanagementconsolehmc.htm>
<3><Printable PDFs><ipha1/printablepdf.htm>
<3><HMC concepts><ipha1/concepts.htm>
<4><HMC graphical user interface><ipha1/hmcgraphicaluserinterface.htm>
<5><Navigation area><ipha1/navigationarea.htm>
<5><Contents area><ipha1/contentsarea.htm>
<5><Menu bar><ipha1/menubar.htm>
<5><Toolbar><ipha1/toolbar.htm>
<5><Status bar><ipha1/statusbar.htm>
<5><HMC applications><ipha1/hmcapps.htm>
<4><HMC access control><ipha1/managingusers.htm>
<5><Managed resource roles><ipha1/resourcemanagement.htm>
<5><Task roles><ipha1/taskmanagement.htm>
<4><Overview of HMC roles><ipha1/overviewofroles.htm>
<5><Predefined HMC roles><ipha1/predefinedroles.htm>
<5><Customized HMC roles><ipha1/defcustomrole.htm>
<4><Overview of HMC tasks><ipha1/overviewoftasksandroles.htm>
<5><HMC configuration tasks><ipha1/syscon.htm>
<5><HMC user management tasks><ipha1/uman.htm>
<5><Managed system profile tasks><ipha1/sysprof.htm>
<5><Managed system tasks><ipha1/mansys.htm>
<5><Logical partition tasks><ipha1/partitiontasks.htm>
<5><Capacity on Demand tasks><ipha1/cuodtasks.htm>
<5><Virtualization Engine Technologies tasks><ipha1/vetasks.htm>
<5><Service tasks><ipha1/problemdetermination.htm>
<5><Frame tasks><ipha1/frametasks.htm>
<4><Managed system power-on modes><ipha1/poweronmodes.htm>
<4><Managed system power-on states><ipha1/poweronstates.htm>
<4><Types of HMC network connections><ipha1/netconhmc.htm>
<5><Connecting the HMC to a network><ipha1/connectingthehmctoanetwork.htm>
<5><Private and open networks in the HMC environment><ipha1/privpubnetwork.htm>
<5><Using the HMC as a DHCP server><ipha1/hmcdhcpserver.htm>
<3><Working with the HMC><ipha1/workingwiththehmc.htm>
<4><Logging in, shutting down, rebooting, and logging off the HMC><ipha1/shutdownrestartlogout.htm>
<5><Logging in to the HMC><ipha1/poweron.htm>
<5><Shutting down, rebooting, and logging off the HMC><ipha1/reboot.htm>
<4><Configuring the HMC management environment><ipha1/configuringyourhmcmanagementenvironment.htm>
<5><Testing network connectivity><ipha1/testingnetworkconnectivity.htm>
<5><Installing and using the remote client><ipha1/usingtheremoteclient.htm>
<5><Working with the HMC machine code><ipha1/scndupgrd.htm>
<5><Changing the HMC interface language and locale><ipha1/changingtheinterfacelanguage.htm>
<5><Configuring the keyboard layout><ipha1/configkeyboardlayout.htm>
<5><Using the HMC remote command line><ipha1/usingtheremotecommandline.htm>
<6><Viewing HMC remote command information><ipha1/viewingremcom.htm>
<6><Setting up secure script execution between SSH clients and the HMC><ipha1/settingupsecurescriptexecutionsbetweensshclientsandthehmc.htm>
<6><Enabling and disabling HMC remote commands><ipha1/enablinganddisablingremotecommands.htm>
<4><Accessing the ASMI using the HMC><ipha1/accessingasmi.htm>
<4><Viewing recent HMC activity><ipha1/viewingrecenthmcactivity.htm>
<4><Managing partition profile information><ipha1/backingupandrestoringprofileinformation.htm>
<5><Backing up profile data><ipha1/backupprofdata.htm>
<5><Initializing profile data><ipha1/initializeprofdata.htm>
<5><Restoring profile data><ipha1/restoreprofdata.htm>
<5><Removing profile data><ipha1/removeprofdata.htm>
<4><Backing up and restoring the HMC><ipha1/backingupthehmc.htm>
<5><Backing up critical HMC data><ipha1/backingupcriticalconsoledata.htm>
<5><Restoring critical HMC data><ipha1/restoringcriticalconsoledata.htm>
<6><Restoring from DVD><ipha1/restoredvd.htm>
<6><Restoring from a remote server><ipha1/restoreremotesys.htm>
<5><Scheduling and reviewing scheduled HMC backups><ipha1/schedulingandreviewingscheduledbackups.htm>
<5><Saving HMC upgrade data><ipha1/savingupgradedata.htm>
<5><Reinstalling the HMC machine code><ipha1/recoveringthehmc.htm>
<4><Reinstalling the HMC machine code><ipha1/recoveringthehmc.htm>
<4><Managing security on the HMC><ipha1/managingsecurityonyourhmc.htm>
<5><Creating a user><ipha1/creatingusers.htm>
<5><Creating a customized HMC role><ipha1/customroles.htm>
<5><Editing user information and roles><ipha1/editinguserinformationandroles.htm>
<5><Copying user information><ipha1/copyingusers.htm>
<5><Viewing a user description><ipha1/viewinguserdefinitions.htm>
<5><Deleting a user><ipha1/deletingauser.htm>
<5><Changing HMC user passwords><ipha1/changingpasswords.htm>
<5><Changing the managed system's password><ipha1/updatepassword.htm>
<3><Working with managed systems and frames><ipha1/workingwithmanagedsystemsusingyourhmc.htm>
<4><Powering on and off the managed system><ipha1/poweringonandoffyourmanagedsystem.htm>
<5><Powering on the managed system><ipha1/poweringonthemanagedsystem.htm>
<5><Powering off the managed system><ipha1/poweringoffthemanagedsystem.htm>
<5><Scheduling power-on and power-off operations for the managed system><ipha1/schedulingmanagedsystempower.htm>
<4><Accessing the managed system><ipha1/accessingyourmanagedsystem.htm>
<5><Overview of passwords><ipha1/overviewofthepasswords.htm>
<5><Virtual operating system consoles><ipha1/virtualoperatingsystemconsoles.htm>
<6><Verify that consoles are configured><ipha1/checktoseeifconsolesareconfigured.htm>
<6><5250 console><ipha1/fiftytwofifty.htm>
<7><Preparing the logical partition to connect><ipha1/settingup5250.htm>
<7><Connecting to a 5250 console><ipha1/connecting5250.htm>
<8><Connecting to a 5250 console locally><ipha1/local5250.htm>
<8><Connecting to a 5250 console remotely><ipha1/remote5250.htm>
<6><Virtual terminal><ipha1/virtualterminal.htm>
<5><Control panel functions><ipha1/virtualcontrolpanel.htm>
<4><Finding data about the managed systems><ipha1/findingdataaboutyourmanagedsystems.htm>
<5><Viewing information about a managed system><ipha1/viewinginformationaboutamanagedsystem.htm>
<5><Updating managed system information><ipha1/updatingmanagedsysteminformationdisplayedinthecontentsarea.htm>
<5><Deleting the managed system><ipha1/deletingthemanagedsystemfromthecontentsarea.htm>
<5><Disconnecting another HMC connection><ipha1/releasinganhmclockonamanagedsystem.htm>
<4><Managing the frame using the HMC><ipha1/managingyourframe.htm>
<5><Adding a frame><ipha1/addframe.htm>
<5><Initializing the frame><ipha1/initializeframe.htm>
<5><Modifying information about the frame><ipha1/viewingproperties.htm>
<5><Updating frame information><ipha1/rebuildframe.htm>
<5><Resetting or removing a frame connection><ipha1/resetremoveconnection.htm>
<4><Recovering partition data on a managed system><ipha1/recoverpartitiondata.htm>
<4><Managing operating systems><ipha1/managingresourcesonamanagedsystem.htm>
<5><Resetting the operating system on a partition><ipha1/resetoslpar.htm>
<5><Shutting down an operating system><ipha1/shutdownos.htm>
<4><Adding managed systems to the HMC environment><ipha1/addingmanagedsystems.htm>
<4><Moving the managed system from an open network to a private network><ipha1/movetoprivate.htm>
<4><Extending an existing network><ipha1/usingexisting.htm>
<5><Using an existing private network with the HMC acting as a DHCP server><ipha1/usinganexisting.htm>
<5><Using an existing open network><ipha1/usinganexistingopen.htm>
<4><Servicing the managed system><ipha1/servicingyourmanagedsystem.htm>
<3><Related information><ipha1/relatedinformation.htm>
# Start of navigation data from: iphbp/iphbptoc.xml
<2><Advanced System Management Interface><iphbp/kickoff.htm>
<3><Printable PDF><iphbp/printablepdf.htm>
<3><Concepts><iphbp/genconcepts.htm>
<4><ASMI requirements><iphbp/requirements.htm>
<4><ASMI authority levels><iphbp/asmiauthority.htm>
<4><ASMI login restrictions><iphbp/asmilogin.htm>
<3><Setting up login profile><iphbp/loginprofile.htm>
<4><Changing password><iphbp/chgpwd.htm>
<4><Retrieving login audits><iphbp/loginaudit.htm>
<4><Changing default language><iphbp/defaultlang.htm>
<4><Updating installed languages><iphbp/updatelang.htm>
<3><Viewing system information><iphbp/viewsysinfo.htm>
<4><Viewing vital product data><iphbp/viewvpd.htm>
<4><Viewing persistent storage><iphbp/viewpersistent.htm>
<4><Viewing system power control network trace><iphbp/viewsyspctrace.htm>
<4><Viewing progress indicator from previous boot><iphbp/lastsysboot.htm>
<4><Viewing progress indicator history><iphbp/viewsystrace.htm>
<3><Controlling the system power><iphbp/usingsyspc.htm>
<4><Powering the system on and off><iphbp/poweronoff.htm>
<4><Setting auto-power restart><iphbp/autopower.htm>
<4><Performing an immediate power off><iphbp/fastoff.htm>
<4><Performing a system reboot><iphbp/sysreboot.htm>
<4><Setting wake-on LAN><iphbp/remotepower.htm>
<3><Changing system configuration><iphbp/viewsysconfig.htm>
<4><Changing system name><iphbp/systemname.htm>
<4><Changing the processing unit identifier><iphbp/viewcec.htm>
<4><Configuring I/O enclosures><iphbp/configio.htm>
<4><Changing time of day><iphbp/viewtime.htm>
<4><Changing firmware update policy><iphbp/codesource.htm>
<4><Enabling PCI error injection policy><iphbp/pcierrorinject.htm>
<4><Configuring monitoring><iphbp/confmonitor.htm>
<4><Disconnecting an attached HMC><iphbp/disconnecthmc.htm>
<4><Changing the interposer plug count><iphbp/interplugcount.htm>
<4><Changing the number of HSL Opticonnect Connections><iphbp/hslconnect.htm>
<4><Enabling I/O adapter memory allocation><iphbp/ioadapter.htm>
<4><Deconfiguring hardware><iphbp/hardwaredeconfig.htm>
<5><Setting deconfiguration policies><iphbp/viewdeconfig.htm>
<5><Changing processor configuration><iphbp/viewprocconfig.htm>
<5><Changing memory configuration><iphbp/viewmemconfig.htm>
<5><Clearing all deconfiguration errors><iphbp/cleardeconfig.htm>
<4><Programming vital product data><iphbp/programvpd.htm>
<5><Setting the system brand><iphbp/systembrand.htm>
<5><Setting the system identifiers><iphbp/systemkeywords.htm>
<5><Setting the system enclosure type><iphbp/systemenclosures.htm>
<4><Changing service indicators><iphbp/serviceindicators.htm>
<5><Turning off system attention indicator><iphbp/sysattn.htm>
<5><Enabling enclosure indicators><iphbp/enclosureindicators.htm>
<5><Changing indicators by location code><iphbp/viewbylocation.htm>
<5><Performing an LED test on the control panel><iphbp/lamptest.htm>
<3><Setting performance options><iphbp/perfoptions.htm>
<4><Changing the logical memory block size><iphbp/logicalmem.htm>
<4><Enabling cache locking mode><iphbp/cachelocking.htm>
<3><Configuring network services><iphbp/networkservices.htm>
<4><Configuring network interfaces><iphbp/networkconfig.htm>
<4><Configuring network access><iphbp/networkaccess.htm>
<4><Debugging virtual TTY><iphbp/debugvirtualtty.htm>
<3><Using on-demand utilities><iphbp/ondemandutil.htm>
<4><Order Capacity on Demand><iphbp/cuodinfo.htm>
<4><Activate Capacity on Demand><iphbp/cuodactivation.htm>
<4><Resume server firmware after CoD activation><iphbp/cuodrecovery.htm>
<4><Use Capacity on Demand commands><iphbp/cuodcmd.htm>
<3><Using concurrent maintenance utilities><iphbp/concurrentmaint.htm>
<4><Controlling power to IDE devices><iphbp/viewidectrl.htm>
<4><Preparing the operator panel><iphbp/opanelmaint.htm>
<3><Troubleshooting the system using service aids><iphbp/usingsysservaid.htm>
<4><Displaying error and event logs><iphbp/displayerrlog.htm>
<4><Enabling serial port snoop><iphbp/serialportsnoop.htm>
<4><Initiating a platform dump><iphbp/platformdump.htm>
<4><Initiating a service processor dump><iphbp/spdump.htm>
<4><Configuring a serial port setup><iphbp/serialportsetup.htm>
<4><Configuring your modem><iphbp/configmodem.htm>
<4><Configuring call-home and call-in policy><iphbp/callhomesetup.htm>
<4><Testing the call-home policy><iphbp/callhometest.htm>
<4><Rebooting the service processor><iphbp/rebootfsp.htm>
<4><Restoring your server to factory settings><iphbp/factorysettings.htm>
# End of navigation data from: iphbp/iphbptoc.xml
<2><Operations Console><ipha1/opsconsole.htm>
<2><Twinaxial console><ipha1/twinax.htm>
# End of navigation data from: ipha1/ipha1toc.xml
# Start of navigation data from: ipha2/ipha2toc.xml
<1><Working with Capacity on Demand><ipha2/kickoff.htm>
<2><What's new><ipha2/whatnew.htm>
<2><Printable PDFs><ipha2/print.htm>
<2><Preparing for Capacity on Demand><ipha2/codprep.htm>
<3><Planning for Capacity on Demand><ipha2/cuodplancapacity.htm>
<3><Determining when to activate resources><ipha2/cuodplannumprocs.htm>
<3><Setting up your environment for CoD><ipha2/cuodplansetup.htm>
<3><Software licensing considerations><ipha2/cuodconswlic.htm>
<2><Working with Capacity Upgrade on Demand><ipha2/cuod.htm>
<3><Concepts><ipha2/cuodconparent.htm>
<4><Processors and memory units><ipha2/cuodconproc.htm>
<4><Activation codes><ipha2/cuodconpodact.htm>
<3><Ordering Capacity Upgrade on Demand activation features><ipha2/cuodorder.htm>
<3><Using Capacity Upgrade on Demand><ipha2/cuoduse.htm>
<4><Activating resources permanently><ipha2/cuodactpermcap.htm>
<4><Viewing settings for CoD resources><ipha2/cuoddisplayresources.htm>
<4><Viewing and saving CoD code-generation information><ipha2/cuodviewsave.htm>
<2><Working with Trial Capacity on Demand><ipha2/tcod.htm>
<3><Starting Trial Capacity on Demand><ipha2/tcodorder.htm>
<3><Viewing settings for CoD resources><ipha2/tcoddisplayresources.htm>
<3><Viewing and saving CoD code generation information><ipha2/tcodviewsave.htm>
<3><Stopping Trial Capacity on Demand><ipha2/tcodend.htm>
<2><Working with On/Off Capacity on Demand><ipha2/oocod.htm>
<3><Concepts><ipha2/onoffcodconcepts.htm>
<4><Processor or memory days><ipha2/onoffcodconprocdays.htm>
<4><On/Off CoD enablement code><ipha2/onoffcodconenable.htm>
<4><Billing for On/Off Capacity on Demand><ipha2/onoffcodconbill.htm>
<3><Enabling On/Off Capacity on Demand><ipha2/onoffcodenable.htm>
<4><Obtaining and entering your On/Off CoD enablement code><ipha2/onoffcodenableobtain.htm>
<4><Establishing monthly reporting to IBM><ipha2/onoffcodenablereport.htm>
<3><Using On/Off Capacity on Demand><ipha2/onoffcoduse.htm>
<4><Activating resources temporarily on your server><ipha2/onoffcodenablerequest.htm>
<4><Viewing settings for CoD resources><ipha2/onoffcodusedisplay.htm>
<4><Viewing and saving CoD information><ipha2/onoffcoduseviewinfo.htm>
<4><Stopping an On/Off CoD request><ipha2/onoffcodusestoprequest.htm>
<4><Discontinuing On/Off Capacity on Demand><ipha2/onoffcodend.htm>
<2><Working with Reserve Capacity on Demand><ipha2/rcod.htm>
<3><Concepts><ipha2/reservecodconcepts.htm>
<4><Processor days><ipha2/reservecodconprocdays.htm>
<4><Reserve capacity prepaid feature and reserve capacity prepaid code><ipha2/reservecodconenable.htm>
<3><Enabling Reserve Capacity on Demand><ipha2/reservecodenable.htm>
<3><Using Reserve Capacity on Demand><ipha2/reservecoduse.htm>
<4><Viewing settings for Reserve CoD processors><ipha2/reservecodusedisplay.htm>
<4><Viewing shared processor information><ipha2/reservecodusesharedprocpool.htm>
<4><Viewing and saving CoD code-generation information><ipha2/rcodviewsave.htm>
<2><Working with Capacity BackUp><ipha2/cbu.htm>
<3><Processors available for Capacity BackUp><ipha2/cbuprocs.htm>
<3><Software licensing considerations for Capacity BackUp><ipha2/cbuswlicense.htm>
<2><Related information><ipha2/relatedinfo.htm>
# End of navigation data from: ipha2/ipha2toc.xml
# Start of navigation data from: ipha3/ipha3toc.xml
<1><Troubleshooting><ipha3/kickoff.htm>
<2><What's new><ipha3/whatsnew.htm>
<2><Printable PDF><ipha3/printablepdf.htm>
<2><Managing problems><ipha3/howservermanages.htm>
<2><Detecting problems><ipha3/detecting.htm>
<3><Attention light overview><ipha3/attention_lights.htm>
<3><Messages overview><ipha3/messages_overview.htm>
<3><Reference codes overview><ipha3/reference_codes_overview.htm>
<2><Analyzing and handling problems><ipha3/analyzing.htm>
<3><Beginning problem analysis><ipha3/begin_pa.htm>
<4><AIX problem analysis><ipha3/aix_problem_analysis.htm>
<4><i5/OS problem analysis><ipha3/os400_problem_analysis.htm>
<4><Linux problem analysis><ipha3/linux_problem_analysis.htm>
<3><Collecting reference codes><ipha3/collectsrc.htm>
<3><Reference codes list><ipha3/referencecodes.htm>
<4><HMC error codes><ipha3/hmc_codes.htm>
<5><0xxxxx><ipha3/hmc_codes_0.htm>
<5><HSCE xxxx><ipha3/hmc_codes_hsce.htm>
<5><HSCI xxxx><ipha3/hmc_codes_hsci.htm>
<5><HSCL xxxx><ipha3/hmc_codes_hscl.htm>
<5><HSCP xxxx><ipha3/hmc_codes_hscp.htm>
<5><HSCS xxxx><ipha3/hmc_codes_hscs.htm>
<4><SRN codes><ipha3/srn_codes.htm>
<3><Supporting diagnostics><ipha3/supporting_diagnostics.htm>
<4><Online and stand-alone diagnostics><ipha3/aix_diagnostics.htm>
<5><Online diagnostics><ipha3/online_procedure.htm>
<6><Service mode><ipha3/service_mode.htm>
<6><Maintenance mode><ipha3/maintenance_mode.htm>
<6><Concurrent mode><ipha3/concurrent_mode.htm>
<5><Stand-alone diagnostics from CD><ipha3/standalone_procedure.htm>
<5><Stand-alone diagnostics from a NIM server><ipha3/standalone_nim.htm>
<4><Performing a slow boot><ipha3/slow_boot.htm>
<4><Performing dumps><ipha3/mainstoragedump.htm>
<5><Platform and SP dumps><ipha3/platform_dump.htm>
<5><i5/OS main storage dumps><ipha3/main_dump.htm>
<5><Managing dumps><ipha3/manage_dumps.htm>
<6><Copying a dump><ipha3/copy_platform.htm>
<6><Reporting a dump><ipha3/report_msd.htm>
<6><Deleting a dump><ipha3/delete_msd.htm>
<4><Determing the primary or alternate console><ipha3/determine_console.htm>
<4><Correcting the managed system state><ipha3/managedsystemstates.htm>
<4><Resetting the service processor><ipha3/reset_sp.htm>
<4><Resetting the managed system connection from the HMC><ipha3/reset_connection.htm>
<4><Checking for an IP conflict><ipha3/ip_conflict.htm>
<3><Viewing messages><ipha3/view_messages.htm>
<4><AIX messages><ipha3/view_aix_mess.htm>
<4><HMC messages><ipha3/view_hmc_messages.htm>
<4><i5/OS messages><ipha3/view_os400_mess.htm>
<4><Linux messages><ipha3/view_linux_messages.htm>
<3><Using Service Focal Point><ipha3/sfp.htm>
<4><Viewing serviceable events><ipha3/viewevents.htm>
<4><Closing serviceable events><ipha3/closeevent.htm>
<4><Repairing serviceable events><ipha3/repairevent.htm>
<5><Viewing serviceable event partition information><ipha3/vieweventpartition.htm>
<4><Activating and deactivating LEDs><ipha3/fru_leds.htm>
<4><Setting up connection monitoring><ipha3/setup.htm>
<3><Replacing and verifying parts><ipha3/verifying_the_repair.htm>
<2><Reporting problems><ipha3/reporting.htm>
<3><Problem reporting forms><ipha3/problem_forms.htm>
<3><Contacting IBM support><ipha3/contacting_support.htm>
<2><Related information><ipha3/related.htm>
# End of navigation data from: ipha3/ipha3toc.xml
# Start of navigation data from: ipha5/ipha5toc.xml
<1><Služby a podpora><ipha5/kickoff.htm>
<2><Služby a podpora zákazníků><ipha5/customersvcsupport.htm>
<3><Co je nového><ipha5/whatnew.htm>
<3><Prohlížení a tisk PDF><ipha5/printablepdf.htm>
<3><Přehled><ipha5/overview.htm>
<4><Prvky servisního prostředí><ipha5/elements.htm>
<5><Konektivita><ipha5/connectivity.htm>
<5><Servisní informace><ipha5/inventory.htm>
<5><Elektronické nahlašování problémů><ipha5/electronicpbmreport.htm>
<5><Opravy><ipha5/introfixes.htm>
<5><Vzdálená podpora><ipha5/introremotesupport.htm>
<4><Úvod do servisních aplikací><ipha5/intro2.htm>
<5><Elektronický servisní agent><ipha5/electronicserviceagent.htm>
<5><RSF (Remote Support Facility).><ipha5/remotesupportfacility.htm>
<5><SFP (Service Focal Point).><ipha5/servicefocalpoint.htm>
<4><Mapa servisních aplikací a funkcí><ipha5/mapsvcappsfunc.htm>
<3><Scénáře><ipha5/scenarios.htm>
<4><Scénáře: Operační systém AIX><ipha5/aixscenarios.htm>
<5><Scénář: Několik logických částí s operačním systémem AIX s konzolí HMC><ipha5/aixmultiple.htm>
<5><Scénář: Několik serverů s operačním systémem AIX bez konzole HMC><ipha5/aixwohmc.htm>
<4><Scénáře: Operační systém i5/OS><ipha5/os400scenarios.htm>
<5><Scénář: Několik logických částí s operačním systémem i5/OS, které používají VPN v logické části s operačním systémem i5/OS><ipha5/os400multiplevpn.htm>
<5><Scénář: Několik logických částí s operačním systémem i5/OS, které používají modem na konzoli HMC><ipha5/os400multiplehmc.htm>
<5><Scénář: Několik logických částí s operačním systémem i5/OS, které používají modem v logické části s operačním systémem i5/OS><ipha5/os400multiplemodemonpartition.htm>
<5><Scénář: Několik logických částí s operačním systémem i5/OS, které používají modem na konzoli HMC a modem v logické části s operačním systémem i5/OS><ipha5/os400multiplebothmodems.htm>
<5><Scénář: Operační systém i5/OS bez konzole HMC, který používá VPN><ipha5/os400wohmc.htm>
<4><Scénář: Operační systém Linux><ipha5/linuxscenarios.htm>
<5><Scénář: Operační systém Linux bez konzole HMC><ipha5/linuxwohmc.htm>
<3><Nastavení servisního prostředí><ipha5/settingup.htm>
<4><Nastavení konzole HMC pomocí průvodce instalací a nastavením><ipha5/useguidedsetup.htm>
<4><Použití sítí v servisním prostředí><ipha5/networking.htm>
<4><Nastavení konzole HMC pro připojení k poskytovateli služeb><ipha5/setuphmcconnect.htm>
<5><Volba metody připojení><ipha5/choosemethod.htm>
<5><Zadání kontaktních dat a účetních informací o vaší firmě><ipha5/contactnconnect.htm>
<5><Zadání voleb pro monitorování připojení><ipha5/lanoption.htm>
<5><Konfigurace funkce elektronického servisního agenta na konzoli HMC><ipha5/configesa.htm>
<6><Specifikace času a způsobu, jakým elektronický servisní agent odesílá informace poskytovateli služeb><ipha5/whennhowesa.htm>
<6><Nastavení oznamování servisních událostí><ipha5/notificationsvcevents.htm>
<6><Prohlížení systémových informací na Internetu><ipha5/viewinfoesa.htm>
<4><Nastavení serveru pro připojení k poskytovateli služeb><ipha5/setupsvrtoconnect.htm>
<5><Nastavení operačního systému AIX pro připojení k poskytovateli služeb><ipha5/setupaixpartition.htm>
<5><Nastavení operačního systému i5/OS pro připojení k poskytovateli služeb><ipha5/setupos400partition.htm>
<6><Nastavení operačního systému i5/OS pro připojení přes VPN><ipha5/os400connectvpn.htm>
<6><Nastavení operačního systému i5/OS pro připojení přes modem na serveru><ipha5/os400connectmodem.htm>
<6><Nastavení operačního systému i5/OS pro připojení přes konzoli HMC><ipha5/os400connecthmc.htm>
<5><Nastavení operačního systému Linux pro připojení k poskytovateli služeb><ipha5/setuplinuxpartition.htm>
<5><Nastavení servisního procesoru pro připojení k poskytovateli služeb><ipha5/serviceprocessorconnect.htm>
<4><Testování připojení><ipha5/testingconnection.htm>
<5><Použití konzole HMC><ipha5/testhmcconn.htm>
<5><Použití operačního systému i5/OS><ipha5/testos400conn.htm>
<5><Použití operačního systému AIX><ipha5/testaixconn.htm>
<5><Použití operačního systému Linux><ipha5/testlinuxconn.htm>
<3><Přizpůsobení servisních nastavení><ipha5/customizing.htm>
<4><Specifikace času a způsobu, jakým elektronický servisní agent odesílá informace poskytovateli služeb><ipha5/whennhowesa.htm>
<4><Nastavení oznamování servisních událostí><ipha5/notificationsvcevents.htm>
<4><Prohlížení systémových informací na Internetu><ipha5/viewinfoesa.htm>
<4><Zadání voleb pro monitorování připojení><ipha5/lanoption.htm>
<3><Nahlašování problémů><ipha5/reporting.htm>
<4><Nahlašování problémů v případě nedostupnosti konzole HMC><ipha5/reporthmcdown.htm>
<4><Nahlašování problémů v případě nedostupnosti serveru><ipha5/reportserverdown.htm>
<3><Získání oprav><ipha5/fixes.htm>
<4><Opravy konzole HMC><ipha5/fixeshmc.htm>
<4><Opravy firmwaru (interní kód LIC)><ipha5/fixesserverfirmware.htm>
<5><Koncepce><ipha5/fixfirmwareconcepts.htm>
<6><Umístění úložiště><ipha5/repositorylocations.htm>
<6><Úrovně firmwaru (interní kód LIC)><ipha5/firmwarelevels.htm>
<6><Dočasná a trvalá strana servisního procesoru><ipha5/t_side_p_side.htm>
<6><Kde najít informace o opravách><ipha5/infoaboutfixes.htm>
<5><Scénáře: Opravy firmwaru (interní kód LIC)><ipha5/fixfirmwarescenarios.htm>
<6><Získání oprav serveru a podsystému napájení pomocí konzole HMC><ipha5/fixfirmscenhmc.htm>
<6><Získání oprav firmwaru serveru bez použití konzole HMC><ipha5/fixfirmscennohmc.htm>
<6><Získání oprav firmwaru serveru prostřednictvím i5/OS pomocí systému spravovaného konzolí HMC><ipha5/fixfirmscenhmcopsys.htm>
<6><Získání oprav firmwaru I/O adaptérů a zařízení pomocí konzole HMC (AIX)><ipha5/fixiofirmscenhmc.htm>
<6><Získání oprav firmwaru I/O adaptérů a zařízení bez použití konzole HMC><ipha5/fixiofirmscennohmc.htm>
<5><Správa oprav firmwaru (interní kód LIC)><ipha5/fixfirmwaremanage.htm>
<6><Zobrazení existujících úrovní firmwaru (interní kód LIC)><ipha5/viewexistlevel.htm>
<6><Zobrazení dostupných úrovní firmwaru (interní kód LIC)><ipha5/viewavaillevels.htm>
<6><Zobrazení původního dopisu k opravě firmwaru><ipha5/viewfixcoverletter.htm>
<6><Odebrání aktuální úrovně úrovně firmwaru (interní kód LIC)><ipha5/removecurrentlevel.htm>
<6><Získání opravy firmwaru serveru na optických médiích><ipha5/get_fix_media.htm>
<6><Získání specifické opravy firmwaru (interní kód LIC)><ipha5/getspecificfix.htm>
<6><Trvalá instalace opravy firmwaru (interní kód LIC)><ipha5/install_fix_permanently.htm>
<6><Přechod na nové vydání úrovně firmwaru (interní kód LIC)><ipha5/upgrade_to_new_ga.htm>
<6><Získání servisních nástrojů a nástrojů na zvyšování produktivity pro operační systém Linux><ipha5/obtain_service_tools.htm>
<5><Odstraňování problémů s opravami firmwaru (interní kód LIC)><ipha5/troubleshooting_firm.htm>
<6><Na systémovém informačním panelu se zobrazují samé nuly><ipha5/all_zeros.htm>
<6><Server, který byl dříve spravován konzolí HMC><ipha5/previous_hmc.htm>
<4><Opravy operačních systémů><ipha5/fixesoperatingsystems.htm>
<3><Povolení vzdálené podpory><ipha5/remotesupport.htm>
<4><Metody vzdálené podpory><ipha5/remotesupportmethods.htm>
<4><Povolení vzdálené podpory na konzoli HMC><ipha5/enableremotesupporthmc.htm>
<4><Povolení vzdálené podpory bez použití konzole HMC><ipha5/enableremotesupportwohmc.htm>
<3><Související informace><ipha5/related.htm>
# Start of navigation data from: iphau/iphautoc.xml
<2><Service provider information><iphau/kickoff.htm>
<3><What's new><iphau/whatsnew.htm>
<3><Printable PDF><iphau/printing.htm>
<3><Start of call procedure><iphau/starthere.htm>
<4><Symptom index><iphau/symptomlist.htm>
<3><Detecting problems><iphau/detecting.htm>
<4><i5/OS problem determination><iphau/probdeterminationos400.htm>
<5><Using the Service Action Log (SAL)><iphau/usingsal.htm>
<5><Using the Product Activity Log (PAL)><iphau/usingpal.htm>
<5><Using the problem log><iphau/usingproblog.htm>
<4><AIX or Linux problem determination><iphau/probdetermination.htm>
<4><System unit problem determination><iphau/sysunitprobdetermination.htm>
<4><HMC machine code problem determination><iphau/hmcsoftprobdet.htm>
<3><Analyzing problems><iphau/analyzing.htm>
<4><Problems with loading and starting the operating system (AIX and Linux)><iphau/bootprb.htm>
<4><Problems with noncritical resources><iphau/noncritical.htm>
<4><Intermittent problems><iphau/intermittent.htm>
<5><About intermittent problems><iphau/imitabout.htm>
<5><General intermittent problem checklist><iphau/imitchecklist.htm>
<5><Analyzing intermittent problems><iphau/imitanalyzing.htm>
<5><Intermittent symptoms><iphau/imitsymptoms.htm>
<5><Failing area intermittent isolation procedures><iphau/imitintpips.htm>
<4><IPL problems><iphau/iplprob.htm>
<5><Cannot perform IPL from the control panel (no reference code)><iphau/noiplcontrolpanel.htm>
<5><Cannot perform IPL at a specified time (no reference code)><iphau/noiplspectime.htm>
<5><Cannot automatically perform IPL after a power failure><iphau/noiplpowerfail.htm>
<4><Power problems><iphau/powerprob.htm>
<5><Cannot power on system unit><iphau/pwrpsystemon.htm>
<5><Cannot power on I/O expansion unit><iphau/pwrpsecondaryon.htm>
<5><Cannot power off system or I/O expansion unit><iphau/pwrpoff.htm>
<3><Reference codes><ipha6/kickoff.htm>
<4><List of system reference codes><ipha6/refcodelist.htm>
<4><Using system reference codes><ipha6/usingsrcs.htm>
<4><List of service request numbers><ipha6/srnsmain.htm>
<4><Using service request numbers><ipha6/srnsusing.htm>
<4><List of progress codes><ipha6/progcodesmain.htm>
<4><Using progress codes><ipha6/progcodesusing.htm>
<3><Isolating problems><iphau/isolating.htm>
<4><Isolation procedures><iphau/pips.htm>
<5><Bus, RIO/HSL><iphau/pipbus.htm>
<6><Breaking down a RIO/HSL or PCI bus reference code><iphau/pipbusbreakrc.htm>
<6><DSA translation><iphau/pipbusdsabdown.htm>
<6><Card positions><iphau/pipbuscardpos.htm>
<6><Converting the loop number to NIC port location labels><iphau/pipbuslooptonic.htm>
<6><PCI bus isolation using AIX, Linux, or the HMC><iphau/pipbusaixhmc.htm>
<6><Verifying an HSL, bus, or multi-adapter bridge repair><iphau/pipbusverifying.htm>
<6><HSL loop configuration and status form><iphau/fmhslform.htm>
<6><Installed features in a PCI bridge set form><iphau/fmpciinstalled.htm>
<6><RIO/HSL link status diagnosis form><iphau/fmhsldiagchart.htm>
<5><Communication><iphau/pipcomm.htm>
<5><Disk unit><iphau/pipdiskunit.htm>
<5><I/O processor (IOP)><iphau/pipsdiop.htm>
<5><Intermittent isolation procedures><iphau/pipint.htm>
<5><Licensed internal code (LIC)><iphau/piplic.htm>
<5><Logical partition><iphau/piplpar.htm>
<5><Operations Console><iphau/opcip.htm>
<5><Power><iphau/pippower.htm>
<5><Routers><iphau/piprtr.htm>
<5><Service processor><iphau/pipsp.htm>
<5><Tape unit isolation procedures><iphau/piptape.htm>
<5><Twinaxial workstation I/O processor><iphau/piptwinaxial.htm>
<5><Workstation adapter><iphau/pipwsa.htm>
<5><Workstation adapter console><iphau/wscip01.htm>
<4><AIX fast path MAP><iphau/aixfastpath.htm>
<4><Linux fast path MAP><iphau/linuxfastpath.htm>
<4><HMC isolation procedures><iphau/hmcisolationproc.htm>
<4><Using failing item codes><iphau/failingitems.htm>
<4><Symbolic FRUs><iphau/fru.htm>
<4><Failing function codes (FFCs)><iphau/fail1.htm>
<5><Failing function code list><iphau/ffclist.htm>
<3><Resolving problems><iphau/resolving.htm>
<4><Finding part locations><iphau/locations.htm>
<5><Location codes><iphau/loccodes.htm>
<5><Model 510 and 9123-710><iphau/loc510.htm>
<5><Model 520><iphau/locsqsf2.htm>
<5><Model 550 and 9124-720><iphau/loc550.htm>
<5><Model 570><iphau/locsql4mlx.htm>
<5><Model 575><iphau/loc575.htm>
<5><Model 590 and 595><iphau/loc590.htm>
<5><5074, 8079-002, and 8093-002 expansion units><iphau/loc5074.htm>
<5><5079 expansion unit><iphau/loc5079.htm>
<5><0588 and 5088 expansion units><iphau/loc5088.htm>
<5><5094, 5294, and 8094-002 expansion units><iphau/loc5094.htm>
<5><0595 and 5095 expansion units><iphau/loc5095.htm>
<5><5791, 5794, and 7040-61D expansion units><iphau/loc5791.htm>
<5><7311-D10, 7311-D11, and 5790 expansion units><iphau/locd11.htm>
<5><7311-D20 expansion unit><iphau/locd20.htm>
<5><Integrated xSeries adapter (IXA) card><iphau/locixa.htm>
<5><OpenPower><iphau/lochv.htm>
<5><Addresses><iphau/addresses.htm>
<4><Part assembly diagrams><iphau/partassemblies.htm>
<5><Model 510 and 9123-710><iphau/pa510.htm>
<5><Model 520><iphau/pa520.htm>
<5><Model 550 and 9124-720><iphau/pa550.htm>
<5><Model 570><iphau/pa570.htm>
<5><Model 575><iphau/pa575.htm>
<5><Model 590, 595, and 5792 rack><iphau/pa590.htm>
<5><0588, 5079, 5088, and 5294 expansion units><iphau/pafinal5088.htm>
<5><5074 and 5094 expansion units><iphau/pafinal5074.htm>
<5><0595 and 5095 expansion units><iphau/pafinal5095.htm>
<5><5791 and 5794><iphau/pa5791.htm>
<5><7311-D11 and 5790 expansion units><iphau/pad11.htm>
<5><7311-D20 expansion unit><iphau/pad20.htm>
<5><7014 rack><iphau/pa7014.htm>
<5><OpenPower><iphau/pahv.htm>
<4><Part number catalog><iphau/partnumbers.htm>
<5><System parts><iphau/partssystem.htm>
<5><Cables><iphau/partscables.htm>
<5><Miscellaneous parts><iphau/partsmisc.htm>
<5><HMC parts><iphau/partshmc.htm>
<4><Removing and replacing parts><iphau/removereplace.htm>
<5><Model 510 and 7123-710><iphau/rr510.htm>
<5><Model 520><iphau/rrsqsf2.htm>
<5><Model 550 and 9124-720><iphau/rr550.htm>
<5><Model 570><iphau/rrsql4mlx.htm>
<5><Model 575><iphau/rr575.htm>
<5><Model 590 and 595><iphau/rr590.htm>
<5><5074, 5079, 8079-002, and 8093-002 expansion units><iphau/rr50745079.htm>
<5><0588 and 5088 expansion units><iphau/rr5088.htm>
<5><5094, 5294, and 8094-002 expansion units><iphau/rr5094.htm>
<5><0595 and 5095 expansion units><iphau/rr5095.htm>
<5><5791, 5794, and 7040-61D expansion units><iphau/rr5791.htm>
<5><7311-D11 and 5790 expansion units><iphau/rrd11.htm>
<5><7311-D20 expansion unit><iphau/rrd20.htm>
<5><RIO/HSL cables><iphau/rrhslriocables.htm>
<5><Type 2748, 2757, 2763, 2778, 2780, 2782, 4758, 4764, 5703 cards><iphau/rrcards.htm>
<6><Replacing the cache battery pack><iphau/rrcachebatpack.htm>
<6><Replacing the cache directory card><iphau/rrcachedircard.htm>
<6><Replacing the battery on a type 4758 card><iphau/rr4758battery.htm>
<6><Disabling the cryptographic coprocessor on a type 4758 card><iphau/rr4758crypto.htm>
<6><Replacing the battery on a type 4764 card><iphau/rr4764battery.htm>
<6><Disabling the cryptographic coprocessor on a type 4764 card><iphau/rr4764crypto.htm>
<5><OpenPower><iphau/rrhv.htm>
<3><Verifying the repair><iphau/verifying.htm>
<4><Verifying the repair from the HMC><iphau/endcall.htm>
<4><Verifying the repair for i5/OS><iphau/verifyingos400.htm>
<4><Verifying the repair for AIX and Linux><iphau/verifyingaix.htm>
<3><Reference information><iphau/referenceinfo.htm>
<4><i5/OS data recovery information><iphau/os400recovery.htm>
<5><Disk unit recovery procedures><iphau/recovdisk.htm>
<6><Starting disk service><iphau/recovdiskstart.htm>
<6><Exchanging a disk unit with a device parity protection><iphau/recovdiskdpp.htm>
<6><Exchanging a disk unit with mirrored protection><iphau/recovdiskmir.htm>
<6><Resuming mirrored protection><iphau/recovdiskrmp.htm>
<6><Saving data and initializing the disk unit><iphau/recovdiskinit.htm>
<6><Initializing the disk unit and copying to disk><iphau/recovdiskcopy.htm>
<6><Copy the contents of the LIC log><iphau/recovdiskdst.htm>
<5><SRC address formats><iphau/refcodeformats.htm>
<5><Storage I/O card modes and jumpers><iphau/jumpers.htm>
<6><Setting or changing the mode of an I/O card><iphau/jumpset.htm>
<6><Mode jumper has been overridden><iphau/jumpoverridden.htm>
<6><Mode jumper is missing><iphau/jumpmissing.htm>
<5><Logical partitions><iphau/lpar.htm>
<6><Determining if the system has logical partitions><iphau/lpardetermine.htm>
<6><Determining if the system has guest partitions><iphau/lparguest.htm>
<6><Determining the release level of a guest partition><iphau/lparguestrelease.htm>
<6><Determining the hosting partition of a guest partition><iphau/lparguesthost.htm>
<5><Load-source disks and alternate IPL devices><iphau/loadsrcdisks.htm>
<6><Finding the load-source disk on systems without mirrored protection><iphau/loadsrcnonmir.htm>
<6><Finding the load-source disk on systems with mirrored protection><iphau/loadsrcmir.htm>
<6><Alternate IPL device><iphau/loadsrcaltipl.htm>
<5><Reclaiming IOP cache storage><iphau/reclaimiop.htm>
<4><Working with AIX diagnostics><iphau/working01.htm>
<5><General AIX diagnostic information><iphau/gen01.htm>
<5><Loading the AIX online or the eserver standalone diagnostics><iphau/aixdiagnostics.htm>
<5><AIX tasks and service aids><iphau/aixserviceaids.htm>
<4><Powering on and powering off><iphau/onoff.htm>
<5><Powering off an expansion unit><iphau/offexpansion.htm>
<5><Using the control panel power button to power off><iphau/offpanelbutton.htm>
<4><HMC maintenance><iphau/hmcreference.htm>
<5><HMC diagnostics overview><iphau/hmcdiagoverview.htm>
<5><Viewing the HMC console logs><iphau/viewhmclogs.htm>
<4><Service functions><iphau/sfun.htm>
<5><Dedicated service tools (DST)><iphau/dst.htm>
<6><System paging environments><iphau/page.htm>
<7><Stand-alone paging (non-paging)><iphau/pagealone.htm>
<7><Limited paging><iphau/pagelimited.htm>
<7><Full paging><iphau/pagefull.htm>
<6><Accessing DST><iphau/hadst.htm>
<7><Performing an IPL to DST><iphau/xidst.htm>
<7><Changing a service tools user ID><iphau/chgstid.htm>
<7><Resetting the QSECOFR service tools user ID><iphau/resetqsecofr.htm>
<7><Performing an IPL to DST for secondary partitions><iphau/iplsp.htm>
<7><Pressing the system request key while the system is operational><iphau/req.htm>
<7><Selecting Function 21 while the system is operational><iphau/x21.htm>
<7><Performing an alternate IPL to DST><iphau/altdst.htm>
<6><Function keys in DST><iphau/fkeys.htm>
<6><Exiting DST><iphau/end.htm>
<6><DST options><iphau/dstmf.htm>
<7><Installing LIC><iphau/dstopilic.htm>
<7><Installing the operating system><iphau/dstopios.htm>
<7><Perform an IPL><iphau/pipl.htm>
<7><Work with LIC><iphau/ll.htm>
<7><Work with disk units><iphau/wdskdst.htm>
<8><Work with disk configuration><iphau/dskcf.htm>
<8><Display disk configuration><iphau/disdc.htm>
<8><Work with ASP threshold><iphau/aspt.htm>
<8><Work with ASP configuration><iphau/aspc.htm>
<8><Work with mirrored protection><iphau/mirr.htm>
<8><Work with device parity protection><iphau/devpa.htm>
<8><Work with disk compression><iphau/dskcomp.htm>
<8><Work with disk unit recovery><iphau/dskrec.htm>
<8><Disk unit problem recovery procedures><iphau/dupr.htm>
<7><Work with DST environment><iphau/contenv.htm>
<8><Work with active service tools><iphau/wactst.htm>
<8><Work with system devices><iphau/outprt.htm>
<8><Work with service tools user IDs><iphau/chgdst.htm>
<8><Work with system values><iphau/wwval.htm>
<8><Work with alternate installation device><iphau/dstbootload.htm>
<7><Select DST console mode><iphau/wwserv.htm>
<7><Start a service tool><iphau/dstool.htm>
<8><Display/Alter/Dump><iphau/dad.htm>
<8><Licensed internal code log><iphau/licl.htm>
<8><Licensed internal code trace><iphau/tlic.htm>
<8><Hardware service manager><iphau/hsman.htm>
<8><Main storage dump manager><iphau/msdm.htm>
<8><Product activity log (PAL)><iphau/pro.htm>
<8><Operator panel functions><iphau/oppanfun.htm>
<8><Performance data collector><iphau/perfdata.htm>
<8><Work with communications trace><iphau/wwct.htm>
<7><Perform automatic installation of the operating system><iphau/osautoinstall.htm>
<7><Save Licensed Internal Code (LIC)><iphau/savelic.htm>
<7><Work with save storage and restore storage><iphau/srstorage.htm>
<7><Work with remote service support><iphau/rdst.htm>
<8><Allowing access for remote service support><iphau/edst.htm>
<8><Activating remote service support><iphau/adst.htm>
<7><Work with system partitions><iphau/wrksysop.htm>
<7><Work with system capacity><iphau/wwcapacity.htm>
<7><Work with system security><iphau/wwsecurity.htm>
<7><End batch restricted state><iphau/endbatchrest.htm>
<5><Hardware service manager><iphau/hsm.htm>
<6><HSM options><iphau/hsmenu.htm>
<7><Packaging hardware resources><iphau/phr.htm>
<7><Logical hardware resources><iphau/lhr.htm>
<7><Locate resource by name><iphau/lr.htm>
<7><Failed and non-reporting resources><iphau/fai.htm>
<7><System Power Control Network (SPCN)><iphau/spcnh.htm>
<7><Work with service action log><iphau/gap.htm>
<7><Display label location work sheet><iphau/lloca.htm>
<7><Device concurrent maintenance><iphau/cncmnt.htm>
<6><Collecting information and performing functions from the HSM displays><iphau/keys.htm>
<7><Change resource details><iphau/cdet.htm>
<7><Concurrent maintenance><iphau/hsmconc.htm>
<7><Create frame information><iphau/crtf.htm>
<7><Debug the resource><iphau/dbug.htm>
<7><Display address><iphau/addrss.htm>
<7><Display associated resources><iphau/assoc.htm>
<7><Display card gap information><iphau/dispcardgap.htm>
<7><Display failed resources><iphau/dfai.htm>
<7><Display hardware contained within package><iphau/dispconthw.htm>
<7><Display location information><iphau/displocinfo.htm>
<7><Display non-reporting resources><iphau/dnonh.htm>
<7><Display resources associated with IOP><iphau/drai.htm>
<7><Display resource details><iphau/disprdetails.htm>
<7><Display resources requiring attention><iphau/requ.htm>
<7><Display resource status><iphau/stat.htm>
<7><Display serial/part numbers, logical address, and status/resource name information><iphau/dseri.htm>
<7><Display system bus resources><iphau/sbr.htm>
<7><Display system information><iphau/dspsysinfo.htm>
<7><Display unresolved locations><iphau/hsmun.htm>
<7><Print><iphau/rprt.htm>
<7><Refresh the display><iphau/refreshdsp.htm>
<7><Remove non-reporting resource info><iphau/hsmrem.htm>
<7><Reserve frame space><iphau/rfs.htm>
<7><Using high-speed link (HSL) specific options><iphau/hsloptions.htm>
<8><Display detail><iphau/hsldspdetail.htm>
<8><Display system information><iphau/dispsysinfo.htm>
<8><Display port information><iphau/dspportinfo.htm>
<8><Resources associated with loop><iphau/resassocloop.htm>
<7><Verify resources><iphau/vfyr.htm>
<6><Symbols on the HSM displays><iphau/indic.htm>
<6><Printing the system configuration list><iphau/pscl.htm>
<6><Verification procedures><iphau/vpro.htm>
<7><Hardware service manager - verify><iphau/hsmverify.htm>
<7><Verify optical storage unit><iphau/vfycd.htm>
<7><Verify tape><iphau/vfytap.htm>
<7><Verify communications><iphau/vfycmn.htm>
<5><Product activity log (PAL)><iphau/pal.htm>
<6><The Service Action Log (SAL)><iphau/sal.htm>
<6><PAL location><iphau/palloc.htm>
<6><Recovering from PAL errors while in DST><iphau/palrecov.htm>
<6><Paging environment><iphau/vdst.htm>
<6><Options and function keys><iphau/palop.htm>
<7><Analyze log><iphau/analyzelog.htm>
<7><Display or print by log ID><iphau/dspprtid.htm>
<7><Change PAL sizes><iphau/chgpalsizes.htm>
<7><Work with removable media lifetime statistics><iphau/intv.htm>
<7><Display or print removable media session statistics><iphau/dspprtstats.htm>
<7><Reference code description><iphau/refcodedesc.htm>
<7><Sort by... function><iphau/sortb.htm>
<7><Address information function><iphau/addin.htm>
<7><View description><iphau/viewdescfun.htm>
<7><Hexadecimal PAL data><iphau/hexdta.htm>
<6><Interpreting PAL reports><iphau/hiwelr.htm>
<7><Some considerations when interpreting PAL reports><iphau/palconsider.htm>
<7><Resource name><iphau/rn.htm>
<7><Resource type, model, and location><iphau/restml.htm>
<7><Class><iphau/class.htm>
<7><System reference code><iphau/srefcode.htm>
<7><Multiple SRC entries><iphau/multisrc.htm>
<7><Logical address format><iphau/la.htm>
<7><Sequence number><iphau/seqnum.htm>
<7><Secondary code><iphau/secondcode.htm>
<7><Table ID><iphau/tabid.htm>
<7><IPL source/state><iphau/iplss.htm>
<7><Hexadecimal reports><iphau/hexr.htm>
<8><More information from hexadecimal reports><iphau/diplpaliop.htm>
<5><Service reference procedures><iphau/srp.htm>
<6><Setting the system date and time><iphau/sdt.htm>
<6><Determining the dominant operating system><iphau/oprun.htm>
<6><System password><iphau/stpas.htm>
<6><System unique identifier><iphau/suid.htm>
<6><Determining a primary or alternate console><iphau/dpac.htm>
<6><Locating the system's load source from the system console><iphau/lsysload.htm>
<6><History file><iphau/hl.htm>
<6><Low-level debug (LLD) and data collecting procedures><iphau/lld.htm>
<7><Displaying data for functions 63 and 64><iphau/lld54c.htm>
<6><Logical partitions><iphau/lparinfo.htm>
<7><Examples: Missing or non-reporting system bus resources><iphau/missresc.htm>
<7><Determining the release level of a logical partition><iphau/lpardrlp.htm>
<7><Locating a partition's console and load source><iphau/lparspc.htm>
<7><Querying logical partition time and date><iphau/ptdq.htm>
<7><Finding the SRC history list for a logical partition><iphau/lparsrchist.htm>
<7><Accessing the panel functions of a logical partition><iphau/lparppf.htm>
<7><Determining which logical partition owns a FRU or system I/O resource><iphau/lpardopsior.htm>
<7><Selecting IPL source and mode for a logical partition><iphau/lparipltypmod.htm>
<6><IASP/Clustering><iphau/cluster.htm>
<7><Determining if a tower is configured as switchable under OptiConnect><iphau/switchtwr.htm>
<7><Determining the power controlling and current logical system ownership of a tower><iphau/twrowner.htm>
<7><Determining the resource name and HSL loop number of an HSL I/O bridge><iphau/resnameprocedure.htm>
<7><Switching ownership of a tower's switchable resources><iphau/switchowner.htm>
<7><Switching the mode of a tower's switchable resources><iphau/switchmode.htm>
<5><Control panel functions><iphau/cpfu.htm>
<6><Values for IPL types, system operating modes, and speeds><iphau/iplvalues.htm>
<6><Ways to access the control panel><iphau/cpfcways.htm>
<6><Control panel function descriptions><iphau/cpfdc.htm>
<7><Primary control panel functions><iphau/normfunc.htm>
<7><Extended control panel functions><iphau/extfunc.htm>
<7><Low-level debug (LLD) panel functions><iphau/lldfunc.htm>
<5><System reference code (SRC) information><iphau/srci.htm>
<6><SRC formats><iphau/srcd2.htm>
<7><Word 1 - SRC general information><iphau/x11.htm>
<7><Word 2 - System status information><iphau/xf12.htm>
<8><Main storage dump indicator (M)><iphau/f12m.htm>
<8><IPL state indicator (I)><iphau/f12i.htm>
<8><IPL type last initiated indicator (G)><iphau/f12g.htm>
<6><System reference codes (SRCs)><iphau/systemrcs.htm>
<7><System reference codes (SRCs)><iphau/srcson.htm>
<8><SRC format description><iphau/srcformatdesc.htm>
<8><Hardware related SRC formats><iphau/vlcpsf.htm>
<8><Logical partition SRC descriptions and actions><iphau/lparurcs.htm>
<8><LIC detected PRC formats><iphau/fmt61.htm>
<7><LIC URC groups><iphau/vmcrc.htm>
<7><IPL status SRCs><iphau/iplsrc.htm>
<7><General status SRCs><iphau/gssrc.htm>
<5><Initial program load (IPL) information><iphau/iplin.htm>
<6><IPL type, mode, and speed options><iphau/idesct.htm>
<6><Methods to perform IPL><iphau/iplmethods.htm>
<6><Alternate installation IPL><iphau/bootload.htm>
<6><IPL sequence><iphau/iplsequence.htm>
<7><Service processor initialization><iphau/sp.htm>
<7><LIC initialization><iphau/hlic.htm>
<8><Log entries><iphau/logentries.htm>
<6><Status SRCs><iphau/ipls.htm>
<5><Licensed Internal Code (LIC)><iphau/lic.htm>
<6><Fixes and cumulative PTF packages><iphau/cum.htm>
<6><Displaying LIC fixes><iphau/ptfl.htm>
<6><Utilities to install and restore LIC><iphau/mir.htm>
<7><Utility to install LIC><iphau/mcl.htm>
<7><Utility to restore LIC><iphau/mcr.htm>
<6><Authorized Program Analysis Report (APAR)><iphau/aparmtr.htm>
<5><System architecture and configuration><iphau/ossf.htm>
<6><System power overview><iphau/spwo.htm>
<7><Power supply><iphau/pwrsup.htm>
<7><Battery power unit><iphau/xbpu.htm>
<7><System Power Control Network (SPCN)><iphau/spcn.htm>
<7><SPCN menu flow><iphau/spcn9.htm>
<8><Fields on the SPCN display><iphau/spcnfields.htm>
<8><Display detail option><iphau/ddr.htm>
<9><Fields on the Display Detail for Frame display><iphau/detframe.htm>
<9><Fields on the Display Detail for Unit display><iphau/detunit.htm>
<6><High speed link><iphau/hsl.htm>
<6><Multi-adapter bridge><iphau/multiadapt.htm>
<6><Resource names><iphau/names.htm>
<6><Hardware configuration restrictions><iphau/rest.htm>
<6><Communications card, cable, and wrap connector reference><iphau/comccwc.htm>
<6><Communications signal voltage levels><iphau/comsigvolt.htm>
<5><Working with storage dumps><iphau/srpa.htm>
<6><Automatic main storage dump><iphau/amsd.htm>
<6><Performing a main storage dump to disk (manual MSD)><iphau/msdtd.htm>
<6><Copying a main storage dump><iphau/copmsd.htm>
<7><Work with current main storage dump><iphau/wwcurdump.htm>
<7><Work with copies of main storage dumps><iphau/wwdumpcopies.htm>
<6><Main storage dump status><iphau/msds.htm>
<6><Error recovery for dumps><iphau/erp.htm>
<6><Performing a service processor storage dump><iphau/spdump_condor.htm>
<6><Copying the IOP storage dump to removable media><iphau/copydtd.htm>
<6><Performing an IOP dump using HSM (all models)><iphau/duhsm.htm>
<6><IOP dump information in the PAL (all models)><iphau/dupal.htm>
<5><i5/OS operating system><iphau/os.htm>
<6><DST in i5/OS full paging environment><iphau/dsto.htm>
<6><DST in i5/OS limited paging environment><iphau/dstol.htm>
<6><System Service Tools (SST)><iphau/ssto.htm>
<7><Accessing SST><iphau/hasst.htm>
<7><SST options><iphau/sstmf.htm>
<8><Start a service tool><iphau/starttool.htm>
<8><Work with active service tools><iphau/wwactive.htm>
<8><Work with disk units><iphau/wwdsku.htm>
<8><Work with diskette data recovery><iphau/wwdd.htm>
<9><Processing restrictions><iphau/wwddprest.htm>
<9><Alter diskette data><iphau/add.htm>
<9><Read data from diskette><iphau/drd.htm>
<9><Write data to diskette><iphau/dwd.htm>
<9><Display diskette data><iphau/ddd.htm>
<9><Print reports><iphau/pdd.htm>
<9><How to use the Work with Diskette Data Recovery option><iphau/ddrhow.htm>
<8><Work with system partitions><iphau/wwsyspart.htm>
<8><Work with system capacity><iphau/wwscap.htm>
<8><Work with system security><iphau/wwssec.htm>
<8><Work with service tools user IDs><iphau/wwstid.htm>
<7><SST function keys><iphau/sstfunk.htm>
<6><Online problem analysis and resolution><iphau/opar.htm>
<7><System-detected problems><iphau/sdp.htm>
<8><Problem log><iphau/plog.htm>
<8><Messages relating to hardware failures><iphau/mpt.htm>
<7><Customer-detected problems><iphau/cdp.htm>
<7><Service support facility><iphau/supfac.htm>
<6><Displaying i5/OS PTFs><iphau/ptfo.htm>
<6><i5/OS or LIC APAR information><iphau/aparos.htm>
<6><How to reset an I/O processor card while the system is up and running><iphau/riop.htm>
<6><Varying configuration descriptions on and off><iphau/uvary.htm>
<6><Commonly used i5/OS service commands><iphau/cusc.htm>
<7><Work with System Value (WRKSYSVAL) command><iphau/xsysval.htm>
<7><Service attributes (DSPSRVA or  CHGSRVA) commands><iphau/srvval.htm>
<8><ANZPRBAUTO><iphau/anzp.htm>
<8><CRITMSGUSR><iphau/critmsgusr.htm>
<8><RPTPRBAUTO><iphau/rptprb.htm>
<8><RPTSRVPVD><iphau/srvpvd.htm>
<8><SNDDTAPKT><iphau/snddtapkt.htm>
<8><PTFINSTYP><iphau/ptfinst.htm>
<7><Change Transmit Level (CHGXMTLVL) command><iphau/chgxl.htm>
<7><Work with Hardware Products (WRKHDWPRD) command><iphau/wrkhrd.htm>
<8><Using the configuration description label information to prepare for a system upgrade><iphau/before.htm>
<8><Using the configuration description label information after a system upgrade><iphau/after.htm>
<6><Verify commands><iphau/vfyc.htm>
<7><Verify communications><iphau/vfy.htm>
<8><Procedure><iphau/vfyproc.htm>
<8><Test descriptions><iphau/tede.htm>
<9><Remote modem test><iphau/rmodem.htm>
<9><Local modem test><iphau/lmodem.htm>
<9><Communications cable test><iphau/commcab.htm>
<9><Communications I/O adapter test><iphau/commio.htm>
<9><Communications I/O processor test><iphau/commiop.htm>
<9><Communications I/O processor memory test><iphau/commiopm.htm>
<9><Communications port A modem and coupler test><iphau/commporta.htm>
<9><External ring test><iphau/extring.htm>
<9><Communications/LAN link test><iphau/commlan.htm>
<9><Wireless network management utility><iphau/wire.htm>
<9><Wireless echo back test><iphau/web.htm>
<9><2620/2628 cryptographic processor card test><iphau/cpct.htm>
<9><2620/2628 cryptographic processor card wrap test><iphau/cpcwt.htm>
<9><2620/2628 external cryptographic hardware tests><iphau/echt.htm>
<9><LocalTalk interface test><iphau/lti.htm>
<6><Communications test><iphau/commt.htm>
<7><Wireless LAN adapter card indicators><iphau/indi.htm>
<7><Communications interface trace><iphau/cinttrace.htm>
<7><Concurrent LPDA-2 tests><iphau/lpda.htm>
<4><Using System Management Services (SMS)><iphau/usingsms.htm>
<4><Component and attention LEDs><iphau/compattentionleds.htm>
<4><Memory plugging for models 590 and 595><iphau/memrules590.htm>
<4><Setting expansion unit configuration ID and MTMS value><iphau/setconfigid.htm>
<4><System safety inspection><iphau/fmsi.htm>
<4><Forms><iphau/forms.htm>
<5><Problem reporting forms><iphau/fmpsf.htm>
<5><Work with electrostatic discharge-sensitive parts><iphau/fmesd.htm>
<5><Service log><iphau/fmsrvlog.htm>
<5><HSL loop configuration and status form><iphau/fmhslform.htm>
<5><Installed features in a PCI bridge set form><iphau/fmpciinstalled.htm>
<5><HSL cable location form><iphau/fmhslcableloctab.htm>
<3><Related information><iphau/related.htm>
# End of navigation data from: iphau/iphautoc.xml
# End of navigation data from: ipha5/ipha5toc.xml
<1><Související odkazy><ichwrelated.htm>
<1><Výkladový slovník pojmů><iphav/iphwglos.htm>
<1><Poznámky><icfcc.htm>
# End of navigation data from: icnavsquadrons.xml
